banner_page

SN74LS156DE4

16 Terminations16 Pin Signal switch2 FunctionsMin 4.75V VMax 5.25V V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LS156DE4
  • Package: SOIC
  • Datasheet: -
  • Stock: 532
  • Description: 16 Terminations16 Pin Signal switch2 FunctionsMin 4.75V VMax 5.25V V(Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case SOIC
Number of Pins 16
Weight 141.690917mg
Packaging Rail/Tube
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 16
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Subcategory Decoder/Drivers
Technology TTL
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Pin Count 16
Operating Supply Voltage 5V
Polarity Inverting
Power Supplies 5V
Temperature Grade COMMERCIAL
Max Supply Voltage 5.25V
Min Supply Voltage 4.75V
Propagation Delay 27 ns
Turn On Delay Time 51 ns
Family LS
Logic Function Decoder, Demultiplexer
Output Characteristics OPEN-COLLECTOR
Supply Type Single
Bandwidth 35MHz
Logic IC Type OTHER DECODER/DRIVER
Max I(ol) 0.008 A
High Level Output Current -100μA
Low Level Output Current 8mA
Number of Input Lines 2
Independent Circuits 1
Number of Output Lines 4
Input Conditioning STANDARD
Length 9.9mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

SN74LS156DE4 Overview


Digital switch is provided in the SOIC for the purpose of saving board space.The package is in the form of Rail/Tube.There are 16 terminations included in its basic configuration.The multiplexer's system is supplied with a voltage of 5V.Currently, this turn signal switch has a total of 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply Single that is employed in this case.A configuration of 16 pins is used.This unit is mounted in the way of Surface Mount.The logic switch is a member of the family of LS.Normally, 5V is powered by a battery.This is an the digital switch ic that is classified as Decoder/Drivers.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.The multiplexers have2 input lines on the board that accept voltage levels.Signal sources consist of output lines of 4.The maximum operating temperature of 70°C is acceptable for this signal switch.A temperature of the multiplexer of 0°C should be maintained for minimal operation.In compliance with the applicable device specification, the signal switches has a maximum supply voltage of 5.25V.According to the applicable specification, the digital swith should operate at a minimum supply voltage of 4.75V.A logic IC based on OTHER DECODER/DRIVER is employed in this system.

SN74LS156DE4 Features


Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
2 input lines
4 output lines
OTHER DECODER/DRIVER as the logic IC

SN74LS156DE4 Applications


There are a lot of Texas Instruments SN74LS156DE4 Signal Switches / Multiplexers / Decoders applications.

  • Combinational circuit
  • LVDS
  • HDMI applications
  • Speed control of medern motors
  • Control unit of Central Processing unit (CPU)
  • Seven segment displays
  • Data demultiplexing
  • Medium scale TV wall
  • Analog, digital or video signal switching
  • Time division multiplexing system

Write a review

Note: HTML is not translated!
    Bad           Good