SN74LS169BN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74LS |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | TCO OUTPUT |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 35MHz |
| Base Part Number | 74LS169 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 40 ns |
| Family | LS |
| Logic Function | Counter |
| Direction | Up, Down |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| fmax-Min | 20 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 25MHz |
| Load/Preset Input | YES |
| Timing | Synchronous |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS169BN Overview
This device is packaged in a 16-DIP (0.300, 7.62mm) package. It is configured using 16terminations. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. The 1elements are connected by wires. In total, there are 16pins on the component. Tubeis the packaging method used for this package. As part of the circuit, there are 16pins used to connect other components. It is mounted in the way of [0]. It emerges as a member of LS family. The 74LSseries is well suited to a number of uses. It is decided to use the logic type [0]. Ideally, the operating temperature should be set to 0°C~70°C. Having a mounting type of [0], it is suitable for installation. Providing a voltage of 4.75V~5.25Vensures higher reliability of operation. The array contains elements that store 4bits each. When it comes to this electronic device, TCO OUTPUT are much important features. There are more related parts under the 74LS169base part number. As a result of the voltage source, there is 5V voltage. It takes supply voltage of 5V to operate. Frequency 35MHzdetermines its operation.
SN74LS169BN Features
Embedded in the 16-DIP (0.300, 7.62mm) package
4 bits per element
TCO OUTPUT
Operating supply voltage of 5V
Frequency of 35MHz
SN74LS169BN Applications
There are a lot of Texas Instruments SN74LS169BN Counters & Dividers applications.
- Timers
- TRUE RMS-TO-DC CONVERSION
- Decade counter/decimal decode display (CD4017B）
- Up Counters
- Fixed or Programmable Frequency Division
- POWER COMPUTATION
- Binary counter/decoder
- VHF, UHF, FM, AM, etc.
- ALGEBRAIC COMPUTATION
- Divide-by"N" counters/frequency synthesizers
