SN74LS174NSR
| Parameters | |
|---|---|
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LS174 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 7 |
| Output Current | 8mA |
| Clock Frequency | 40MHz |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 20 ns |
| Family | LS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 26mA |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 30ns @ 5V, 15pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 2 |
| fmax-Min | 30 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 30000000Hz |
SN74LS174NSR Overview
The package is in the form of 16-SOIC (0.209, 5.30mm Width). There is an embedded version in the package Tape & Reel (TR). T flip flop uses Non-Invertedas the output. It is configured with the trigger Positive Edge. Surface Mountis positioned in the way of this electronic part. Powered by a 4.75V~5.25Vvolt supply, it operates as follows. The operating temperature is 0°C~70°C TA. D-Typeis the type of this D latch. The 74LSseries comprises this type of FPGA. Its output frequency should not exceed 40MHz. D latch consists of 1 elements. This process consumes 26mA quiescents. The number of terminations is 16. JK flip flop belongs to 74LS174 family. A voltage of 5V is used as the power supply for this D latch. This D flip flop belongs to the family of LS. It is mounted by the way of Surface Mount. With its 16pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. The part is included in FF/Latches. Its superior flexibility is attributed to its use of 7 circuits. This D flip flop is well suited for TR based on its reliable performance. An electrical current of 5V volts is applied to it. For high efficiency, the supply voltage should be kept at 5V. In addition to its maximum design flexibility, the output current of the T flip flop is 8mA. As of now, there are 2input lines.
SN74LS174NSR Features
Tape & Reel (TR) package
74LS series
16 pins
5V power supplies
SN74LS174NSR Applications
There are a lot of Texas Instruments SN74LS174NSR Flip Flops applications.
- Shift registers
- Event Detectors
- Test & Measurement
- Consumer
- Latch-up performance
- Digital electronics systems
- Supports Live Insertion
- Data storage
- Clock pulse
- Latch
