SN74LS175D
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.25V |
| Clock Frequency | 40MHz |
| Family | LS |
| Current - Quiescent (Iq) | 18mA |
| Current - Output High, Low | 400μA 8mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 25ns @ 5V, 15pF |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 25 ns |
| fmax-Min | 30 MHz |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
SN74LS175D Overview
It is embeded in 16-SOIC (0.154, 3.90mm Width) case. It is included in the package Tube. It is configured with Differentialas an output. JK flip flop uses Positive Edgeas the trigger. There is an electrical part that is mounted in the way of Surface Mount. The supply voltage is set to 4.75V~5.25V. A temperature of 0°C~70°C TAis considered to be the operating temperature. A flip flop of this type is classified as a D-Type. This type of FPGA is a part of the 74LS series. It should not exceed 40MHzin its output frequency. D latch consists of 1 elements. It consumes 18mA of quiescent current without being affected by external factors. A total of 16terminations have been recorded. It is powered from a supply voltage of 5V. This D flip flop belongs to the family of LS. The maximal supply voltage (Vsup) reaches 5.25V.
SN74LS175D Features
Tube package
74LS series
SN74LS175D Applications
There are a lot of Rochester Electronics, LLC SN74LS175D Flip Flops applications.
- Parallel data storage
- Data storage
- Digital electronics systems
- Automotive
- Power down protection
- Shift registers
- Safety Clamp
- Frequency division
- Reduced system switching noise
- Patented noise
