SN74LS175NSR
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LS175 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 4 |
| Output Current | 8mA |
| Number of Bits | 4 |
| Clock Frequency | 40MHz |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 13 ns |
| Family | LS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 18mA |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Max Propagation Delay @ V, Max CL | 25ns @ 5V, 15pF |
| Trigger Type | Positive Edge |
| Number of Output Lines | 2 |
| fmax-Min | 30 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 30000000Hz |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
SN74LS175NSR Overview
The package is in the form of 16-SOIC (0.209, 5.30mm Width). Package Tape & Reel (TR)embeds it. T flip flop uses Differentialas its output configuration. In the configuration of the trigger, Positive Edgeis used. There is an electronic component mounted in the way of Surface Mount. A voltage of 4.75V~5.25Vis used as the supply voltage. It is operating at 0°C~70°C TA. It belongs to the type D-Typeof flip flops. It belongs to the 74LSseries of FPGAs. This D flip flop should not have a frequency greater than 40MHz. D latch consists of 1 elements. As a result, it consumes 18mA of quiescent current without being affected by external factors. Currently, there are 16 terminations. The object belongs to the 74LS175 family. A voltage of 5V is used to power it. The electronic device belongs to the LSfamily. There is an electronic part mounted in the way of Surface Mount. It is designed with 16 pins. Its clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. It is designed with 4bits. The superior flexibility of this circuit is achieved by using 4 circuits. In view of its reliability, this D flip flop is a good fit for TR. A power supply of 5Vis required to operate it. For high efficiency, the supply voltage should be kept at 5V. The output current of 8mA makes it feature maximum design flexibility. In order for the chip to function, it has 2output lines.
SN74LS175NSR Features
Tape & Reel (TR) package
74LS series
16 pins
4 Bits
5V power supplies
SN74LS175NSR Applications
There are a lot of Texas Instruments SN74LS175NSR Flip Flops applications.
- Patented noise
- Matched Rise and Fall
- Communications
- Storage Registers
- Latch-up performance
- Buffer registers
- ESD performance
- Bus hold
- Modulo – n – counter
- Safety Clamp
