banner_page

SN74LS191D

1 Element 5V TTL DUAL Counters & Dividers 74LS Series 74LS191 16 Pins Up, Down Positive Edge 16-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LS191D
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 406
  • Description: 1 Element 5V TTL DUAL Counters & Dividers 74LS Series 74LS191 16 Pins Up, Down Positive Edge 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Weight 141.690917mg
Operating Temperature 0°C~70°C
Packaging Tube
Series 74LS
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature TCO OUTPUT
Technology TTL
Voltage - Supply 4.75V~5.25V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Frequency 25MHz
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74LS191
Pin Count 16
Qualification Status Not Qualified
Operating Supply Voltage 5V
Number of Elements 1
Power Supplies 5V
Propagation Delay 52 ns
Family LS
Logic Function Counter
Direction Up, Down
Logic Type Binary Counter
Number of Bits per Element 4
Trigger Type Positive Edge
fmax-Min 20 MHz
Clock Edge Trigger Type Positive Edge
Load/Preset Input YES
Timing Synchronous
Height 1.75mm
Length 9.9mm
Width 3.91mm
Thickness 1.58mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

SN74LS191D Overview


The device is packaged in the 16-SOIC (0.154, 3.90mm Width)type. In order to configure it, it uses 16terminations. The supply voltage of 5V enables it operate in a fully flexible way. The 1elements are connected by wires. A total of 16pins are available on all components. As [0], it is packaged. Circuit components are connected by 16pins. The Surface Mountway is used to mount it. It is a member of the family [0]. Due to the fact that it is a member of the 74LSseries, it has a wide range of applications. Binary Counteris used as the logic type. In this case, the operating temperature should be set to 0°C~70°C. Mounting type Surface Mountis used. Providing a supply voltage of 4.75V~5.25Vallows it to operate more reliably. The array consists of elements storing 4bits each. Based on Pbfree code, this may result in yes. These electronic devices have many important features, and TCO OUTPUTis one of them. You can find more related parts under its base part number of 74LS191. In this case, there is 5V voltage coming from the voltage source. The device requires a supply voltage of [0]. There is 25MHz frequency associated with it.

SN74LS191D Features


Embedded in the 16-SOIC (0.154, 3.90mm Width) package
4 bits per element
TCO OUTPUT
Operating supply voltage of 5V
Frequency of 25MHz

SN74LS191D Applications


There are a lot of Texas Instruments SN74LS191D Counters & Dividers applications.

  • counting/frequency sy nthesizers-BCD output
  • Divide-by"N" counters/frequency synthesizers
  • Up Counters
  • Time Out Timer for Consumer-Application Industrial Controls
  • TRUE RMS-TO-DC CONVERSION
  • Signal gating
  • Programmable binary and decade
  • VHF, UHF, FM, AM, etc.
  • Programmable decade counters
  • Communications Digital Frequency Synthesizers;

Write a review

Note: HTML is not translated!
    Bad           Good