SN74LS193N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74LS |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 32MHz |
| Base Part Number | 74LS193 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Propagation Delay | 47 ns |
| Turn On Delay Time | 47 ns |
| Reset | Asynchronous |
| Family | LS |
| Logic Function | Counter |
| Direction | Up, Down |
| Logic Type | Binary Counter |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| fmax-Min | 25 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Timing | Synchronous |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS193N Overview
This device is packaged in a 16-DIP (0.300, 7.62mm) package. It is configured with 16terminations. The supply voltage of 5V enables it operate in a fully flexible way. An interconnection of 1elements is provided by wires. 16is the number of pins on all components. As a result, it is packaged as Tube. As part of the circuit, there are 16pins that connect other components. The Through Holeway is used to mount it. In this case, it appears as a member of the LS family. As a member of the 74LSseries, it is ideal for a wide range of applications. Binary Counteris adopted as the logic type. Setting the operating temperature to 0°C~70°C is recommended. The mounting type is Through Hole. When the supply voltage is set to [0], it is able to operate with greater reliability. The array consists of elements storing 4bits each. An important feature of this electronic device is [0]. Further related parts can be found under its base part number 74LS193. In this case, there is 5V voltage coming from the voltage source. The device operates on voltage [0]. In this case, the frequency is 32MHz Hz.
SN74LS193N Features
Embedded in the 16-DIP (0.300, 7.62mm) package
4 bits per element
TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK
Operating supply voltage of 5V
Frequency of 32MHz
SN74LS193N Applications
There are a lot of Texas Instruments SN74LS193N Counters & Dividers applications.
- Time delay circuits
- Fixed or Programmable Frequency Division
- Time Out Timer for Consumer-Application Industrial Controls
- Fixed and programmable counters greater than 10
- ALGEBRAIC COMPUTATION
- SQUARE ROOT
- counting/frequency sy nthesizers-BCD output
- Signal gating
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Communications Digital Frequency Synthesizers;
