SN74LS247DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RIPPLE BLANKING; LAMP TEST INPUT |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74LS247 |
| Pin Count | 16 |
| Number of Outputs | 7 |
| Operating Supply Voltage | 5V |
| Polarity | Inverting |
| Power Supplies | 5V |
| Configuration | 7 Segment |
| Number of Channels | 1 |
| Interface | BCD |
| Operating Supply Current | 7mA |
| Number of Bits | 7 |
| Propagation Delay | 100 ns |
| Family | LS |
| Min Input Voltage | 4.75V |
| Logic Function | Decoder, Demultiplexer |
| Max Input Voltage | 5.25V |
| Output Characteristics | OPEN-COLLECTOR |
| Bandwidth | 35MHz |
| Logic IC Type | SEVEN SEGMENT DECODER/DRIVER |
| Max I(ol) | 0.0032 A |
| Display Type | LED |
| High Level Output Current | -50μA |
| Low Level Output Current | 3.2mA |
| Number of Input Lines | 4 |
| Input Conditioning | STANDARD |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LS247DR Overview
Tape & Reel (TR)'s package was designed similarly.Display drivers is included in the package version 16-SOIC (0.154, 3.90mm Width).Display drivers has a Display type of LED.This electronic part is mounted in the way of Surface Mount.An electrical part like this operates at a temperature of 0°C~70°C.Display drivers should work when powered by a 4.75V~5.25VV power source.The 16 termination is used to terminate transmission lines with impedance-matched devices.Display drivers is a member of the 74LS247 family.A 16 pin is the component that makes up the entire device.As a result, it has 16 pins.Display drivers is powered from a supply voltage of 5V.The supply current of 7mA needs to be provided to fully play its function.Additionally, it can be incorporated into Decoder/Drivers.To ensure high efficiency, the supply voltage should be maintained at 5V.Two 5V power supplies enable it to be used anywhere in the world.I have set it up so that it outputs 7.Additionally, it is also characteriRIPPLE BLANKING; LAMP TEST INPUTed by the letter RIPPLE BLANKING; LAMP TEST INPUT.A 7 Bit was used to design this electronic component.Channel numbers are increasing strongly / weakly: 1.It uses the logic IC known as SEVEN SEGMENT DECODER/DRIVER in its design.LS is a family of electronic devices.
SN74LS247DR Features
16-SOIC (0.154, 3.90mm Width) package
74LS247 family
16 pin count
16 pins
5V power supplies
7 output
SN74LS247DR Applications
There are a lot of Texas Instruments SN74LS247DR display drivers applications.
- Display Driver
- Climate Controls
- Multiplexing with common-cathode LED displays
- Relay Driver
- Medical Equipment
- Portable lab instruments
- Auto dashboard displays
- Set-Top Boxes
- Avionics VFD Modules
- COPS? or Microprocessor Displays
