SN74LS247N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RIPPLE BLANKING; LAMP TEST INPUT |
| Subcategory | Decoder/Drivers |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74LS247 |
| Pin Count | 16 |
| Number of Outputs | 7 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Configuration | 7 Segment |
| Interface | BCD |
| Operating Supply Current | 7mA |
| Number of Bits | 7 |
| Propagation Delay | 100 ns |
| Family | LS |
| Min Input Voltage | 4.75V |
| Logic Function | Decoder, Demultiplexer |
| Number of Inputs | 4 |
| Max Input Voltage | 5.25V |
| Output Characteristics | OPEN-COLLECTOR |
| Bandwidth | 35MHz |
| Logic IC Type | SEVEN SEGMENT DECODER/DRIVER |
| Max I(ol) | 0.0032 A |
| Display Type | LED |
| High Level Output Current | -50μA |
| Low Level Output Current | 3.2mA |
| Input Conditioning | STANDARD |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LS247N Overview
As with Tube, the package is designed similarly.Display drivers is included in the package version 16-DIP (0.300, 7.62mm).This electrical device has a display type of LED, which is the display type of the device.On the board, this component is mounted using Through Hole.The operating temperature of this electrical part is 0°C~70°C.Display drivers should work wDisplay driversh a 4.75V~5.25VV power supply.Typically, 16 terminations match the impedance of transmission lines.Display drivers is a member of the 74LS247 family.The entire device is made up of 16 pins.A 16 pin is used in its design.Powered by a voltage of 5V, it is powered by a supply voltage of V.Display drivers is necessary to provide the 7mA wDisplay driversh a supply current in order for Display drivers to perform fully as intended.Additionally, it can be incorporated into Decoder/Drivers.For optimum efficiency, the supply voltage should be kept at 5V at all times.Due to its two 5V power supplies, it can run anywhere in the world.I have set it up so that it outputs 7.Its characteristics include RIPPLE BLANKING; LAMP TEST INPUT as well.Designed using 7 Bits, this electronic part uses a large number of components.There are basically four elements that make up a 1 element.As for the logic IC it uses, it is a SEVEN SEGMENT DECODER/DRIVER-type.As a member of the LS family, this electronic device can be considered as a portable device.
SN74LS247N Features
16-DIP (0.300, 7.62mm) package
74LS247 family
16 pin count
16 pins
5V power supplies
7 output
1 elements
SN74LS247N Applications
There are a lot of Texas Instruments SN74LS247N display drivers applications.
- Gaming Machines Security
- Calculators and meters
- Driving incandescent displays
- Small Appliances
- Avionics VFD Modules
- Hand Held Instruments
- Instrumentation
- Numerlc and Non-Numerlc Panel Dlsplays
- Bar-Graph Displays
- Panel meters
