SN74LS259BDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74LS259 |
| Pin Count | 16 |
| Output Type | Standard |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 1:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Nominal Supply Current | 36mA |
| Output Current | 8mA |
| Number of Bits | 8 |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 19 ns |
| Family | LS |
| Logic Function | D-Type, Shift Register |
| Current - Output High, Low | 400μA 8mA |
| Logic Type | D-Type, Addressable |
| Trigger Type | LOW LEVEL |
| Schmitt Trigger | No |
| Number of Input Lines | 3 |
| Number of Output Lines | 2 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LS259BDR Overview
16-SOIC (0.154, 3.90mm Width) contains it. A package of Tape & Reel (TR) has been used. It uses Standard as the output. There is a logic type of D-Type, Addressable associated with this electrical device. Mounting this electronic component follows the Surface Mount method. It operates at a voltage of 4.75V~5.25V. It operates at 0°C~70°C degrees Celsius. The 74LS series is associated with this FPGA. Electronic parts with 8 bits are designed for this application. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is a member of the 74LS259 family. With the supply voltage set at 5V, it is able to operate. There are 16 pins on it. LS is the family of this electronic device. The 16 pins are designed into it. Surface Mount is used to mount this electronic part. The part is in the FF/Latches subcategory. There is 5V power supply for it. In the circuit, there are 3 input lines that are constituted by an electronic circuit. The device's reliable performance makes it a good choice for TR. Due to its 8mA output current, it offers maximum design flexibility. In order to achieve high efficiency, the supply voltage should be kept at 5V. Regardless of the input line, the binary equivalent of the input line will be generated by the 2 output lines. This object is composed of 1 elements.
SN74LS259BDR Features
16-SOIC (0.154, 3.90mm Width) package
74LS series
8 Bits
74LS259 family
16 pin count
16 pins
5V power supplies
1 elements
SN74LS259BDR Applications
There are a lot of Texas Instruments SN74LS259BDR Latches applications.
- Avionics
- Timers
- Instrumentation
- Hammer Device Information
- Parallel Input
- Counter control
- Automotive Body Electronics
- Buffer/Storage Registers
- Data acquisition
- Counting
