SN74LS259BN
| Parameters | |
|---|---|
| Number of Input Lines | 3 |
| Number of Output Lines | 2 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74LS |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74LS259 |
| Pin Count | 16 |
| Output Type | Standard |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 1:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Operating Supply Current | 36mA |
| Output Current | 8mA |
| Number of Bits | 8 |
| Propagation Delay | 30 ns |
| Quiescent Current | 19mA |
| Turn On Delay Time | 19 ns |
| Family | LS |
| Logic Function | D-Type, Latch, Shift Register |
| Current - Output High, Low | 400μA 8mA |
| Logic Type | D-Type, Addressable |
| Trigger Type | LOW LEVEL |
| Schmitt Trigger | No |
SN74LS259BN Overview
There is an embedded version of it in package 16-DIP (0.300, 7.62mm). Tube is the way it is packaged. It uses Standard as its output configuration. There is D-Type, Addressable logic type for this electrical device. Mounting this electronic component follows the Through Hole method. The supply voltage of the device is 4.75V~5.25V. A temperature of 0°C~70°C is set as the operating temperature. 74LS is the series number of this FPGA. The electronic part in this image has 8 bits. In this device, there are 16 terminations that have been designed. It belongs to 74LS259 family. The device works with a voltage of 5V for its supply voltage. 16 pins are available on it. LS is the family name of this electronic device. The device has 16 pins. This electronic part is mounted in the way of Through Hole. It belongs to the subcategory of FF/Latches. A total of 5V power supplies are needed to run it. It contains 3 input lines where electronic circuits are present. As the output current is 8mA, the design flexibility is maximum. Optimal efficiency requires 5V as the supply voltage. It follows that 2 output lines are generated from the binary equivalent of the input line. Without external influences, it consumes 19mA quiescent current. This object is composed of 1 elements.
SN74LS259BN Features
16-DIP (0.300, 7.62mm) package
74LS series
8 Bits
74LS259 family
16 pin count
16 pins
5V power supplies
1 elements
SN74LS259BN Applications
There are a lot of Texas Instruments SN74LS259BN Latches applications.
- Stacked or Push-Down Registers
- General-Purpose Register
- Programmable binary
- Shift left with parallel loading
- Frequency dividing
- Communication systems
- Automotive Cluster
- Relay replacement
- Automotive Body Electronics
- Counting
