SN74LS259BNSRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LS259 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Standard |
| Circuit | 1:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Nominal Supply Current | 36mA |
| Output Current | 8mA |
| Number of Bits | 8 |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 19 ns |
| Family | LS |
| Logic Function | D-Type, Shift Register |
| Current - Output High, Low | 400μA 8mA |
| Logic Type | D-Type, Addressable |
| Trigger Type | LOW LEVEL |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Number of Output Lines | 2 |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LS259BNSRE4 Overview
The package in which it is embedded is named 16-SOIC (0.209, 5.30mm Width). Packaged in the way of Tape & Reel (TR). The output it is configured with uses Standard. There is a logic type of D-Type, Addressable for this electrical device. Based on the way of Surface Mount, this electronic part is mounted. In order for it to operate, it needs a supply voltage of 4.75V~5.25V. The operating temperature is 0°C~70°C. An FPGA in this series belongs to the 74LS family. It is designed with 8 bits. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This type belongs to the 74LS259 family. The device is operated when the supply voltage is set to 5V. 16 pins are provided. It is part of the family of electronic devices called LS. Designed with 16 pins, it is compatible with a wide range of devices. Electronic parts are mounted using the Surface Mount method. FF/Latches is the subcategory of this part. 5V power supplies are needed to operate it. (Vsup) should be greater than 4.75V. It contains 3 input lines where electronic circuits are present. The reliability of this device makes it well suited to TAPE AND REEL. Due to its 8mA output current, it offers maximum design flexibility. There are 2 output lines that correspond to the binary equivalents of the input line.
SN74LS259BNSRE4 Features
16-SOIC (0.209, 5.30mm Width) package
74LS series
8 Bits
74LS259 family
16 pin count
16 pins
5V power supplies
SN74LS259BNSRE4 Applications
There are a lot of Texas Instruments SN74LS259BNSRE4 Latches applications.
- Counting
- Avionics
- Stacked or Push-Down Registers
- Frequency dividing
- Multi-line decoders
- Buffer register
- Phase comparator
- Shift register
- Network Switches
- Decade counting
