banner_page

SN74LS279AD

Latch 4.75V~5.25V 2 Bits Standard Latches 74LS Series 74LS279 16 Pins DUAL TTL 16-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LS279AD
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 427
  • Description: Latch 4.75V~5.25V 2 Bits Standard Latches 74LS Series 74LS279 16 Pins DUAL TTL 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Weight 141.690917mg
Operating Temperature 0°C~70°C
Packaging Tube
Series 74LS
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature WITH DUAL S INPUT FOR TWO FUNCTIONS
Technology TTL
Voltage - Supply 4.75V~5.25V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Base Part Number 74LS279
Pin Count 16
Output Type Standard
Operating Supply Voltage 5V
Circuit 1:1
Polarity Non-Inverting
Power Supplies 5V
Number of Circuits 4
Nominal Supply Current 7mA
Output Current 8mA
Number of Bits 2
Propagation Delay 27 ns
Quiescent Current 3.8mA
Turn On Delay Time 12 ns
Family LS
Logic Function Latch
Current - Output High, Low 400μA 8mA
Logic Type S-R Latch
Max I(ol) 0.008 A
Prop. Delay@Nom-Sup 30 ns
Trigger Type LOW LEVEL
Schmitt Trigger No
Number of Input Lines 2
Number of Output Lines 1
Height 1.75mm
Length 9.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74LS279AD Overview


16-SOIC (0.154, 3.90mm Width) contains it. As a result, it has a packaging of Tube. It uses Standard as its output configuration. There is a logic type of S-R Latch for this electrical device. The electronic component is mounted according to the Surface Mount method. The voltage supply is 4.75V~5.25V. A temperature of 0°C~70°C is used for operation. This FPGA is part of the 74LS series. Electronic parts with 2 bits are designed for this application. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The family it belongs to is 74LS279. The supply voltage of the device is 5V. 16 pins are provided. This electronic device belongs to the family of LS. It is designed with 16 pins. Surface Mount is the method used for mounting this electronic part. There is 5V power supply for it. There are 2 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. Due to its 8mA output current, it offers maximum design flexibility. High efficiency requires a supply voltage of 5V. A binary equivalent of the input line is generated by the 1 output lines. There are no external factors that affect it, so it consumes 3.8mA quiescent current. The circuit's superior flexibility is achieved through the use of 4 circuits. Additionally, it is characterized by WITH DUAL S INPUT FOR TWO FUNCTIONS.

SN74LS279AD Features


16-SOIC (0.154, 3.90mm Width) package
74LS series
2 Bits
74LS279 family
16 pin count
16 pins
5V power supplies

SN74LS279AD Applications


There are a lot of Texas Instruments SN74LS279AD Latches applications.

  • TV Set-top Boxes
  • Parallel Output
  • Buffer register
  • Motor Drives
  • Relay replacement
  • Stacked or Push-Down Registers
  • Meter applications
  • Hammer
  • Automotive ADAS
  • Parallel data storage

Write a review

Note: HTML is not translated!
    Bad           Good