SN74LS279ADE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH DUAL S INPUT FOR TWO FUNCTIONS |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74LS279 |
| Pin Count | 16 |
| Output Type | Standard |
| Operating Supply Voltage | 5V |
| Circuit | 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 4 |
| Nominal Supply Current | 7mA |
| Output Current | 8mA |
| Number of Bits | 2 |
| Propagation Delay | 27 ns |
| Turn On Delay Time | 12 ns |
| Family | LS |
| Logic Function | Latch |
| Current - Output High, Low | 400μA 8mA |
| Logic Type | S-R Latch |
| Max I(ol) | 0.008 A |
| Prop. Delay@Nom-Sup | 30 ns |
| Trigger Type | LOW LEVEL |
| Schmitt Trigger | No |
| Number of Input Lines | 2 |
| Number of Output Lines | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS279ADE4 Overview
In the package 16-SOIC (0.154, 3.90mm Width), it can be found. A Tube package is used to package it. In this configuration, the output is set to Standard. This electrical device has Logic type S-R Latch. Mounting this electronic component follows the Surface Mount method. A 4.75V~5.25V supply voltage is required to operate it. There is a temperature of 0°C~70°C at which the system operates. The 74LS series of FPGAs is the one this FPGA belongs to. 2 Bits are used in the design of this electronic part. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There is no doubt that it belongs to the family 74LS279. With the supply voltage set at 5V, it is able to operate. 16 pins are available on it. LS is the family of this electronic device. With the design of the board, there are only 16 pins. Electronic parts are mounted using the Surface Mount method. There is 5V power supply for it. It contains 2 input lines where electronic circuits are present. The output current of 8mA makes it feature maximum design flexibility. High efficiency requires a voltage supply of 5V. It follows that 1 output lines are generated from the binary equivalent of the input line. In order to achieve its superior flexibility, 4 circuits are used. It also has characteristics of WITH DUAL S INPUT FOR TWO FUNCTIONS.
SN74LS279ADE4 Features
16-SOIC (0.154, 3.90mm Width) package
74LS series
2 Bits
74LS279 family
16 pin count
16 pins
5V power supplies
SN74LS279ADE4 Applications
There are a lot of Texas Instruments SN74LS279ADE4 Latches applications.
- Automotive Cluster
- Ring counter
- Frequency dividing
- Automotive HEV/EV Powertrain
- Up-Down Johnson
- Counting
- Programmable binary
- Display driver
- Network Switches
- Hammer
