Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Number of Pins |
16 |
Weight |
951.693491mg |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Series |
74LS |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
WITH DUAL S INPUT FOR TWO FUNCTIONS |
Technology |
TTL |
Voltage - Supply |
4.75V~5.25V |
Terminal Position |
DUAL |
Number of Functions |
4 |
Supply Voltage |
5V |
Base Part Number |
74LS279 |
Pin Count |
16 |
Output Type |
Standard |
Operating Supply Voltage |
5V |
Circuit |
1:1 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Number of Circuits |
4 |
Nominal Supply Current |
7mA |
Output Current |
8mA |
Number of Bits |
2 |
Propagation Delay |
27 ns |
Quiescent Current |
3.8mA |
Turn On Delay Time |
12 ns |
Family |
LS |
Logic Function |
Latch |
Current - Output High, Low |
400μA 8mA |
Logic Type |
S-R Latch |
Max I(ol) |
0.008 A |
Prop. Delay@Nom-Sup |
30 ns |
Trigger Type |
LOW LEVEL |
Schmitt Trigger |
No |
Number of Input Lines |
2 |
Number of Output Lines |
1 |
Height |
5.08mm |
Length |
19.3mm |
Width |
6.35mm |
Thickness |
3.9mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74LS279AN Overview
Package 16-DIP (0.300, 7.62mm) includes it. Tube is the way in which it is packaged. The output it is configured with uses Standard. S-R Latch is the logic type of this electrical device. Through Hole is used to mount this electronic part. With a supply voltage of 4.75V~5.25V, it operates. There is 0°C~70°C operating temperature. An FPGA in this series belongs to the 74LS family. There are 2 bits in this electronic part. This device has been designed with 16 terminations available. The family it belongs to is 74LS279. In order to function, the supply voltage should be set to 5V. The device is equipped with 16 pins. LS is the family name of this electronic device. This board has 16 pins on it, which is what it is designed for. A Through Hole mounting method has been used for this electronic part. A total of 5V power supplies are needed to run it. It contains 2 input lines where electronic circuits are present. Due to its 8mA output current, it offers maximum design flexibility. A high level of efficiency is achieved by maintaining the supply voltage at 5V. A binary equivalent of the input line is generated by the 1 output lines. It consumes 3.8mA of quiescent current without being affected by outside factors. In order to achieve its superior flexibility, 4 circuits are used. Additionally, it is characterized by WITH DUAL S INPUT FOR TWO FUNCTIONS.
SN74LS279AN Features
16-DIP (0.300, 7.62mm) package
74LS series
2 Bits
74LS279 family
16 pin count
16 pins
5V power supplies
SN74LS279AN Applications
There are a lot of Texas Instruments SN74LS279AN Latches applications.
- High-speed logic
- Flip-flops
- Parallel data synchronization
- Display
- Pattern Generators
- Data acquisition
- Hammer
- Communication systems
- Counter
- Pattern generators