banner_page

SN74LS280NE4

5V TTL DUAL Counters & Dividers 14 Pins PDIP


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LS280NE4
  • Package: PDIP
  • Datasheet: PDF
  • Stock: 324
  • Description: 5V TTL DUAL Counters & Dividers 14 Pins PDIP(Kg)

Details

Tags

Parameters
Mount Through Hole
Package / Case PDIP
Number of Pins 14
Weight 927.99329mg
Packaging Rail/Tube
JESD-609 Code e4
Pbfree Code yes
Number of Terminations 14
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Subcategory Arithmetic Circuits
Technology TTL
Terminal Position DUAL
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Pin Count 14
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade COMMERCIAL
Number of Circuits 1
Max Supply Voltage 5.25V
Min Supply Voltage 4.75V
Power Dissipation-Max 80mW
Current - Output 8mA
Number of Bits 9
Propagation Delay 50 ns
Turn On Delay Time 50 ns
Family LS
Logic Function Parity Gen
Output Polarity COMPLEMENTARY
High Level Output Current -400μA
Low Level Output Current 8mA
Power Supply Current-Max (ICC) 27mA
Height Seated (Max) 5.08mm
Width 7.62mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Contains Lead

SN74LS280NE4 Overview


This device is supplied in the PDIP package. For its configuration, 14terminations are used. The supply voltage of 5V enables it operate in a fully flexible way. A total of 14pins are present on all components. Rail/Tubeis the packaging method used for this package. A circuit is connected to other components by 14pins. The way of Through Hole is used to mount it. In this case, it appears as a member of the family [0]. The device contains 9bits of information. Based on the Pbfree code, the result may be yes. The temperature grade of this device is COMMERCIAL. There is 5V voltage comes from the voltage source. For the device to operate, a voltage supply of 5Vis required. The electrical characteristics remain stable at maximum temperature 70°Cfor extended periods. Generally, the temperature limit is set at 0°Cso it will operate over a specified range. A maximum voltage of 5.25Vcan be reached by the device. There is a minimum voltage available for the device of 4.75V. In this case, the electronic components belong to the family of [0]. In order to operate normally, it is designed with circuits with 1values. In the case of a specified high-level voltage, there is -400μA current flowing into the output. If a specified low-level voltage is applied to the output terminal, there is 8mA current flowing into it. In the output terminal, 8mA current flows.

SN74LS280NE4 Features


Embedded in the PDIP package
Operating supply voltage of 5V

SN74LS280NE4 Applications


There are a lot of Texas Instruments SN74LS280NE4 Counters & Dividers applications.

  • Divide-by"N" counters/frequency synthesizers
  • LINEARIZATION
  • Binary counter/decoder
  • Clocks
  • MULTIPLICATION
  • Time Out Timer for Consumer-Application Industrial Controls
  • SQUARE ROOT
  • Frequency dividing circuits
  • Programmable binary and decade
  • Analog multiplexing and demultiplexing

Write a review

Note: HTML is not translated!
    Bad           Good