SN74LS293D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| Additional Feature | DIVIDE BY 2 AND DIVIDE BY 8 FUNCTIONS |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 42MHz |
| Base Part Number | 74LS293 |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Reset | Synchronous |
| Family | LS |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Prop. Delay@Nom-Sup | 70 ns |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 39mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LS293D Overview
The device is packaged in the 14-SOIC (0.154, 3.90mm Width)type. The configuration of this device is based on 14terminations. 5Vis enabled to operate in an extremely flexible manner due to its supply voltage. In this diagram, there are 1elements that are interconnected by wires. In this case, it is packaged as Tube. Circuit components are connected with 14pins. Surface Mountis the way in which it is mounted. In this case, it appears as a member of the LS family. With its 74LSseries designation, it can be used for a range of applications. Binary Counteris adopted as the logic type. It is recommended to set the operating temperature to 0°C~70°C. Mounting type Surface Mountis used. By providing the supply voltage of [0], it is capable of operating more reliably. There are 4 bits stored in each element of the array. Using the Pbfree code, the result may be yes. In regard to this electronic device, DIVIDE BY 2 AND DIVIDE BY 8 FUNCTIONSare essential features. Further related parts can be found under its base part number 74LS293. From the voltage source, there is 5Vvoltage. It operates at a frequency of 42MHz Hz. There is 5.25V maximum supply voltage (Vsup) allowed.
SN74LS293D Features
Embedded in the 14-SOIC (0.154, 3.90mm Width) package
4 bits per element
DIVIDE BY 2 AND DIVIDE BY 8 FUNCTIONS
Frequency of 42MHz
SN74LS293D Applications
There are a lot of Texas Instruments SN74LS293D Counters & Dividers applications.
- Timing applications
- Control counters
- VHF, UHF, FM, AM, etc.
- Divide-by"N" counters/frequency synthesizers
- Fixed and programmable counters greater than 10
- Analog multiplexing and demultiplexing
- Fixed or Programmable Frequency Division
- SQUARING
- SQUARE ROOT
- DIVISION
