SN74LS293N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74LS |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Additional Feature | DIVIDE BY 2 AND DIVIDE BY 8 FUNCTIONS |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 42MHz |
| Base Part Number | 74LS293 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Propagation Delay | 70 ns |
| Turn On Delay Time | 70 ns |
| Reset | Synchronous |
| Family | LS |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 39mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LS293N Overview
A 14-DIP (0.300, 7.62mm)package is used for this device. Using 14terminations, it can be configured. With a supply voltage of 5V volts, it is possible to run it in a fully flexible manner. There are wires connecting 1elements. As a result, it is packaged in the way of a Tube. There are 14 pins going on to connect other parts in the circuit. The way of Through Hole is used to mount it. In this case, it belongs to the family of [0]. The 74LSseries is well suited to a number of uses. It is adopted that the logic type is [0]. It is recommended that the operating temperature be set to 0°C~70°C. In this case, it is mounted with a Through Holetype. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. Each element in the array stores 4 bits. These electronic devices have many important features, and DIVIDE BY 2 AND DIVIDE BY 8 FUNCTIONSis one of them. There are more related parts under the 74LS293base part number. Voltage from the voltage source is [0]. In order to operate, it requires a voltage of [0]. It operates with the frequency of 42MHz.
SN74LS293N Features
Embedded in the 14-DIP (0.300, 7.62mm) package
4 bits per element
DIVIDE BY 2 AND DIVIDE BY 8 FUNCTIONS
Operating supply voltage of 5V
Frequency of 42MHz
SN74LS293N Applications
There are a lot of Texas Instruments SN74LS293N Counters & Dividers applications.
- Up Counters
- Time delay circuits
- Analog multiplexing and demultiplexing
- Timing applications
- Divide-by"N" counters/frequency synthesizers
- Programmable decade counters
- Time-delay circuits
- Frequency dividers
- Fixed and programmable counters greater than 10
- Communications Digital Frequency Synthesizers;
