SN74LS30DG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Gates |
| Packing Method | TUBE |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Current - Output | 8mA |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 22 ns |
| Family | LS |
| Logic Function | NAND |
| High Level Output Current | -16mA |
| Low Level Output Current | 400μA |
| Schmitt Trigger | NO |
| Number of Input Lines | 8 |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LS30DG4 Overview
Shipping overseas is convenient due to the part's packing in SOIC. In total, there have been 14 terminations. 1 functions in the part enhance the user experience significantly. The chip is part of the LS family. A total of 14 pins are injected into the body of the part. There are a number of applications for logic devices mounted with the Surface Mount pin. The datasheets for the 14 pins explain the functions. In this logic device, the value is Gates. Circuits number 1 make up this device. There is a method TUBE in it that is designed for the industry. The datasheet specifies that the part requires 5V volts of power. It is specified in the operating instructions of the chip that the operating voltage will be 5V volts. The device should not operate under environment where temperature is higher than 70°C. Test statistics indicate that the minimum operating temperature of the part would be 0°C. It is recommended that users do not supply the device with voltages greater than 5.25V under normalcircumstances. The lowest voltage fed to the part should be 4.75V. Parts with 8 input lines perform better. The output current is rated 8mA.
SN74LS30DG4 Features
LS Family
SN74LS30DG4 Applications
There are a lot of Texas Instruments SN74LS30DG4 Gates and Inverters applications.
- Electric grinding wheel
- Laptop
- CD player
- Flashlight
- Overvoltage and undervoltage protection
- Urban rail vehicle
- Remote monitoring
- Car refrigerator
- Troubleshooting & Judgment
- DVD
