SN74LS30NSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Weight | 208.312296mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Gates |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LS30 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Output Current | 8mA |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 22 ns |
| Family | LS |
| Logic Function | NAND |
| Number of Inputs | 8 |
| Current - Output High, Low | 400μA 8mA |
| Logic Type | NAND Gate |
| Max Propagation Delay @ V, Max CL | 20ns @ 5V, 15pF |
| Schmitt Trigger | NO |
| Logic Level - Low | 0.8V |
| Logic Level - High | 2V |
| Current - Quiescent (Max) | 800μA |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS30NSR Overview
Shipping overseas is convenient with the part packed in 14-SOIC (0.209, 5.30mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). Using NAND Gate logic, it functions. This part needs a voltage of 4.75V~5.25V to function properly. An extended operating temperature of 0°C~70°C degrees Celsius. Surface Mount is the location of the part. Neither the high 400μA 8mA low state of output current is 400μA 8mA. This is part of the 74LS series. In total, there are 14 terminations. A significant improvement in the user experience can be achieved by the part since it has 1 functions. I would like to point out that this chip is part of LS. Try searching with 74LS30 if you're looking for device variants. There are 14 pins injected into the part body. Many applications use this logic device with Surface Mount mounting. Datasheets for functions of 14 pins are available. The part supports 8 inputs. The logic device shown here is a typical Gates. There is an industry TAPE AND REEL method included. It is specified in the datasheet that the part requires It is specified in the datasheet that the part requires 5V power supplies. power supplies. A device rated at 8mA has 8mA output current. Totally, there are 1 elements used for operation. It is specified with the 5V volts voltage that the chip must be supplied with as its operating voltage. The maximum current in standby mode is 800μA.
SN74LS30NSR Features
NAND Gate Logic Type
Operating Temperature: 0°C~70°C
LS Family
Output Current: 8mA
SN74LS30NSR Applications
There are a lot of Texas Instruments SN74LS30NSR Gates and Inverters applications.
- Electricity for military and civilian life in areas without electricity
- Car
- Urban rail vehicle
- Computer
- Printer
- Island protection
- Communication
- Home theater
- Reactive power compensation function
- Electrical tools
