Parameters |
Mount |
Surface Mount |
Package / Case |
SOIC |
Number of Pins |
16 |
Weight |
141.690917mg |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
16 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Subcategory |
Arithmetic Circuits |
Technology |
TTL |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Pin Count |
16 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
COMMERCIAL |
Max Supply Voltage |
5.25V |
Min Supply Voltage |
4.75V |
Number of Bits |
8 |
Propagation Delay |
15 ns |
Turn On Delay Time |
55 ns |
Family |
LS |
Logic Function |
Multiplexer |
Supply Type |
Single |
Bandwidth |
35MHz |
Output Polarity |
COMPLEMENTARY |
Logic IC Type |
ENCODER |
Number of Input Lines |
8 |
Independent Circuits |
1 |
Number of Output Lines |
3 |
Height |
1.58mm |
Length |
9.9mm |
Width |
3.91mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
SN74LS348DG4 Overview
Providing this information in the SOIC enables digital switch board space to be saved.As part of its basic configuration, 16 terminations are designed as a part of it.For multiplexer's system, a voltage of 5V is supplied.There are 16 component pins in this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.In this case, Single is employed as the supply type.A configuration of 16 pins is used.This unit is mounted in the way of Surface Mount.In the LS family, the logic switch is included.There are 8 bits in signal multiplexer.mux switch's normal operation requires the power supply of 5V.Arithmetic Circuits is the classification for this the digital switch ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.On the multiplexers, 8 input lines are provided for accepting voltage levels.As a signal source, there are 3 output lines.70°C is an acceptable maximum temperature for this signal switch.In order to maintain a minimal operating temperature, the temperature of the multiplexer should be set to 0°C.It is specified that the signal switches should operate at 5.25V as its maximum supply voltage.Typical device specifications specify a voltage supply of 4.75V for the digital swith.It uses IC ENCODER for its logic.
SN74LS348DG4 Features
Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
8 input lines
3 output lines
ENCODER as the logic IC
SN74LS348DG4 Applications
There are a lot of Texas Instruments SN74LS348DG4 Signal Switches / Multiplexers / Decoders applications.
- To select different devices in microprocessor output
- Data demultiplexing
- Electronics industry
- Computer memory
- VGA
- Solenoid cooling fan
- Make full adder
- Automatic health monitoring systems
- Analog to digital conversion
- Make half adder