SN74LS365AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH DUAL OUTPUT ENABLE |
| Subcategory | Bus Driver/Transceivers |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74LS365 |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 6 |
| Load Capacitance | 45pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 6 |
| Propagation Delay | 22 ns |
| Turn On Delay Time | 40 ns |
| Family | LS |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | Buffer, Non-Inverting |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS365AD Overview
Logical driver uses a neat 16-SOIC (0.154, 3.90mm Width) package. Tube external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.75V~5.25V. Qualified to operate within 0°C~70°C TA. The high and low logic state output current of logical driver is 2.6mA 24mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74LS series devices. 16 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. In the LS family, the electric component belongs. 16 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 16 pins. Enhanced with 2 ports. You can search "74LS365" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 6 bits are included within the electrical component. Logical driver features WITH DUAL OUTPUT ENABLE to better serve the need. 6 channels for high quality communication. It is sufficient to make 6 outputs. The typical output current of the logical driver is measured 24mA.
SN74LS365AD Features
Bus Driver/Transceivers
WITH DUAL OUTPUT ENABLE
SN74LS365AD Applications
There are a lot of Texas Instruments SN74LS365AD Buffers & Transceivers applications.
- Satellite ground stations
- Fiber optic cable connection network
- AV receiver
- Metro access rings
- Wireless smart house
- WDM transmission
- Wireless teaching
- Low power, low voltage systems
- Data center
- Structural bonding
