SN74LS367AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ONE FUNCTION WITH TWO BITS |
| Subcategory | Bus Driver/Transceivers |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74LS367 |
| Pin Count | 16 |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 45pF |
| Number of Ports | 2 |
| Propagation Delay | 22 ns |
| Turn On Delay Time | 40 ns |
| Family | LS |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | Buffer, Non-Inverting |
| Number of Bits per Element | 2, 4 (Hex) |
| Control Type | ENABLE LOW |
| Number of Input Lines | 6 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS367AD Overview
Logical driver uses a neat 16-SOIC (0.154, 3.90mm Width) package. Tube external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.75V~5.25V. Qualified to operate within 0°C~70°C TA. The high and low logic state output current of logical driver is 2.6mA 24mA. Logical driver can deal with 3-State output (s). All of the 2 elements are put into use. Digital buffer is one of the 74LS series devices. 16 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. LS family part. 16 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 16 pins. Enhanced with 2 ports. The bus transceiver employs 2, 4 (Hex) bits for each element. You can search "74LS367" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Logical driver features ONE FUNCTION WITH TWO BITS to better serve the need. Because of its 6 lines level input capability, buffer IC is more cost-effective on transimitting signals.
SN74LS367AD Features
Bus Driver/Transceivers
ONE FUNCTION WITH TWO BITS
SN74LS367AD Applications
There are a lot of Texas Instruments SN74LS367AD Buffers & Transceivers applications.
- Military satellite communications
- Satellite radio receiver
- Cable network front end
- Precision geodetic measurement
- Cordless telephone
- transmission relay
- Wireless network systems
- Digital systems
- Fiber optic cable connection network
- Switches/bridges/routers/servers
