SN74LS367AN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74LS |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ONE FUNCTION WITH TWO BITS |
| Subcategory | Bus Driver/Transceivers |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74LS367 |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 6 |
| Operating Supply Current | 100μA |
| Load Capacitance | 45pF |
| Number of Ports | 2 |
| Nominal Supply Current | 100μA |
| Output Current | 24mA |
| Propagation Delay | 22 ns |
| Quiescent Current | 12mA |
| Turn On Delay Time | 22 ns |
| Family | LS |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | Buffer, Non-Inverting |
| Number of Bits per Element | 2, 4 (Hex) |
| Control Type | ENABLE LOW |
| Count Direction | UNIDIRECTIONAL |
| Schmitt Trigger Input | No |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS367AN Overview
Logical driver uses a neat 16-DIP (0.300, 7.62mm) package. Tube external packaging. Available in Through Hole. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.75V~5.25V. Qualified to operate within 0°C~70°C TA. The high and low logic state output current of logical driver is 2.6mA 24mA. Logical driver can deal with 3-State output (s). All of the 2 elements are put into use. Digital buffer is one of the 74LS series devices. 16 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. Transceiver shares the LS family's comprehensive benefits and features. 16 pins are set with the electric part. Buffer IC is suitable for Through Hole applications. Logical driver has 16 pins. Enhanced with 2 ports. The bus transceiver employs 2, 4 (Hex) bits for each element. You can search "74LS367" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 12mA. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Logical driver features ONE FUNCTION WITH TWO BITS to better serve the need. It is sufficient to make 6 outputs. The fundamental operation of logical driver is based on 6 circuits. Does the electronic component support schmitt trigger input? No. The typical output current of the logical driver is measured 24mA. Bus transceiver operates on 100μA.
SN74LS367AN Features
Bus Driver/Transceivers
ONE FUNCTION WITH TWO BITS
SN74LS367AN Applications
There are a lot of Texas Instruments SN74LS367AN Buffers & Transceivers applications.
- Car alarm systems
- Wireless teaching
- Wireless projection application for conferences and business talks
- Wireless multimedia center in smart home
- Precision engineering measurement
- Satellite communication
- Metro access rings
- Indoor ad hoc meeting
- Fiber-to-the-desktop
- Bar, KTV wireless entertainment
