SN74LS368ADR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ONE FUNCTION WITH TWO BITS |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LS368 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Load Capacitance | 45pF |
| Number of Ports | 2 |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 45 ns |
| Family | LS |
| Logic Function | Buffer, Inverter |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | Buffer, Inverting |
| Number of Bits per Element | 2, 4 (Hex) |
| Control Type | ENABLE LOW |
| Number of Input Lines | 6 |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS368ADR Overview
Logical driver uses a neat 16-SOIC (0.154, 3.90mm Width) package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Inverting logic prototype. Buffer IC is fed with a voltage of 4.75V~5.25V. Qualified to operate within 0°C~70°C TA. The high and low logic state output current of logical driver is 2.6mA 24mA. Logical driver can deal with 3-State output (s). All of the 2 elements are put into use. Digital buffer is one of the 74LS series devices. 16 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. Electronic parts from the LS family are used in this part. 16 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 16 pins. Enhanced with 2 ports. The bus transceiver employs 2, 4 (Hex) bits for each element. You can search "74LS368" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. It is recommended to use a 5V power supply. It is generally sold in TAPE AND REEL package. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Logical driver features ONE FUNCTION WITH TWO BITS to better serve the need. Because of its 6 lines level input capability, buffer IC is more cost-effective on transimitting signals.
SN74LS368ADR Features
Bus Driver/Transceivers
ONE FUNCTION WITH TWO BITS
SN74LS368ADR Applications
There are a lot of Texas Instruments SN74LS368ADR Buffers & Transceivers applications.
- Fast Ethernet
- Structural bonding
- Thermal management
- Ethernet circuitry
- Wireless 3D game
- Satellite communications networks
- AV receiver
- Bar, KTV wireless entertainment
- TV signal transmission
- Mainframes, workstations or storage devices
