Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Weight |
500.709277mg |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Series |
74LS |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Technology |
TTL |
Voltage - Supply |
4.75V~5.25V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
74LS373 |
Pin Count |
20 |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Number of Circuits |
8 |
Load Capacitance |
45pF |
Number of Ports |
2 |
Nominal Supply Current |
40mA |
Output Current |
24mA |
Number of Bits |
8 |
Propagation Delay |
12 ns |
Quiescent Current |
24mA |
Turn On Delay Time |
12 ns |
Family |
LS |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
2.6mA 24mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.024 A |
Trigger Type |
POSITIVE EDGE |
Control Type |
ENABLE LOW |
Number of Input Lines |
3 |
Independent Circuits |
1 |
Count Direction |
UNIDIRECTIONAL |
Height |
2.65mm |
Length |
12.8mm |
Width |
7.5mm |
Thickness |
2.35mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74LS373DW Overview
There is an embedded version of it in package 20-SOIC (0.295, 7.50mm Width). A package of Tube has been used. In its configuration, Tri-State is used as the output. In this electrical device, the logic type is D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. A 4.75V~5.25V supply voltage is required to operate it. It operates at 0°C~70°C degrees Celsius. There are a number of FPGAs in this series, including this one. There are 8 bits in this electronic part. In this device, there are 20 terminations. There is no doubt that it belongs to the family 74LS373. The device works with a voltage of 5V for its supply voltage. It has 20 pins that makes it easy to use. In terms of electronic devices, this one is in the LS family. The device has 20 pins. A Surface Mount mounting method has been used for this electronic part. This device has a total of 2 ports. This part is included in FF/Latches. A total of 5V power supplies are required for it to operate. In the circuit, there are 3 input lines that are constituted by an electronic circuit. Due to its 24mA output current, it offers maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. Aquiescent current is consumed by 24mA without being affected by external forces. Its superior flexibility is achieved by using 8 circuits.
SN74LS373DW Features
20-SOIC (0.295, 7.50mm Width) package
74LS series
8 Bits
74LS373 family
20 pin count
20 pins
5V power supplies
SN74LS373DW Applications
There are a lot of Texas Instruments SN74LS373DW Latches applications.
- Parallel Output
- Shift right register
- Buffer register
- Hammer
- Parallel data storage
- Audio and video switching
- Shift right with parallel loading
- Buffer Storage
- Counter control
- PCs and Notebooks