banner_page

SN74LS373DWR

D-Type, Latch 4.75V~5.25V 8 Bits Tri-State Latches 74LS Series 74LS373 20 Pins DUAL TTL 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LS373DWR
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 889
  • Description: D-Type, Latch 4.75V~5.25V 8 Bits Tri-State Latches 74LS Series 74LS373 20 Pins DUAL TTL 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Weight 500.709277mg
Operating Temperature 0°C~70°C
Packaging Cut Tape (CT)
Series 74LS
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Subcategory FF/Latches
Packing Method TR
Technology TTL
Voltage - Supply 4.75V~5.25V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number 74LS373
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Load Capacitance 45pF
Number of Ports 2
Nominal Supply Current 40mA
Output Current 24mA
Number of Bits 8
Propagation Delay 36 ns
Quiescent Current 24mA
Turn On Delay Time 12 ns
Family LS
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 2.6mA 24mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.024 A
Prop. Delay@Nom-Sup 30 ns
Trigger Type POSITIVE EDGE
Control Type ENABLE LOW
Number of Input Lines 8
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 2.65mm
Length 12.8mm
Width 7.5mm
Thickness 2.35mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74LS373DWR Overview


Package 20-SOIC (0.295, 7.50mm Width) includes it. Cut Tape (CT) is the packaging method. It uses Tri-State as the output. This electrical device has a logic type of D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. It operates at a voltage of 4.75V~5.25V. During operation, the temperature is set at 0°C~70°C. An FPGA in this series belongs to the 74LS family. 8 Bits are used in the design of this electronic part. This device has been designed with 20 terminations available. 74LS373 is its family. With the supply voltage set at 5V, it is able to operate. It is equipped with 20 pin count. LS is the family name of this electronic device. This board has 20 pins on it, which is what it is designed for. Mounting this electronic component follows the Surface Mount method. 2 ports are available on this device. Subcategory FF/Latches contains this part. It operates from 5V power supplies. It contains 8 input lines where electronic circuits are present. This device is well suited for TR based on its reliable performance. The 24mA output current gives it maximum design flexibility. The supply voltage should be maintained at 5V for high efficiency. Aquiescent current is consumed by 24mA without being affected by external forces.

SN74LS373DWR Features


20-SOIC (0.295, 7.50mm Width) package
74LS series
8 Bits
74LS373 family
20 pin count
20 pins
5V power supplies

SN74LS373DWR Applications


There are a lot of Texas Instruments SN74LS373DWR Latches applications.

  • Network Switches
  • Shift left register
  • Flip-flops
  • Up/down difference counting
  • Counter control
  • PCs and Notebooks
  • Lamp and Display (LED)
  • Serial Input
  • Display
  • Pattern generators

Write a review

Note: HTML is not translated!
    Bad           Good