Parameters |
Operating Supply Voltage |
5V |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Temperature Grade |
COMMERCIAL |
Number of Circuits |
8 |
Max Supply Voltage |
5.25V |
Min Supply Voltage |
4.75V |
Load Capacitance |
45pF |
Number of Ports |
2 |
Nominal Supply Current |
40mA |
Current - Output |
24mA |
Number of Bits |
8 |
Propagation Delay |
36 ns |
Turn On Delay Time |
12 ns |
Family |
LS |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS DRIVER |
High Level Output Current |
-2.6mA |
Low Level Output Current |
24mA |
Independent Circuits |
1 |
Height Seated (Max) |
2.65mm |
Width |
7.5mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Mount |
Surface Mount |
Package / Case |
SOIC |
Number of Pins |
20 |
Weight |
500.709277mg |
Packaging |
Tape and Reel |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Subcategory |
FF/Latches |
Technology |
TTL |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Pin Count |
20 |
SN74LS373DWRE4 Overview
In the package SOIC, it can be found. As a result, it has a packaging of Tape and Reel. An electronic part with 8 bits is designed. As far as this device is concerned, it has no terminations. The device works with a voltage of 5V for its supply voltage. It is equipped with 20 pin count. It is part of the family of electronic devices called LS. The pin configuration of the device is 20. The electronic part is mounted using the Surface Mount method. As far as ports are concerned, this device has 2 ports. FF/Latches is the subcategory of this part. The device is powered by 5V power supplies. For maximum efficiency, the supply voltage should be set to 5V. The superior flexibility of the system is achieved through its use of 8 circuits. It is set to zero for the low level output current. It has been set to -2.6mA for the high level output current. The operating temperature should be lower than 70°C. The operating temperature should be higher than 0°C. There is a maximum voltage supply of 5.25V that can be applied to it. The minimal voltage for operation is 4.75V. A logic IC that is used in this application is BUS DRIVER. With an output current of 24mA, it is highly flexible in terms of design.
SN74LS373DWRE4 Features
SOIC package
8 Bits
20 pin count
20 pins
5V power supplies
SN74LS373DWRE4 Applications
There are a lot of Texas Instruments SN74LS373DWRE4 Latches applications.
- Sample and hold register
- Stacked or Push-Down Registers
- Display
- BCD counting
- Parallel Input
- TV Set-top Boxes
- Ring counter
- Pattern generators
- Hammer
- Buffer register