banner_page

SN74LS373DWRG4

D-Type, Latch 8 Bits Latches 20 Pins DUAL TTL SOIC


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LS373DWRG4
  • Package: SOIC
  • Datasheet: -
  • Stock: 923
  • Description: D-Type, Latch 8 Bits Latches 20 Pins DUAL TTL SOIC(Kg)

Details

Tags

Parameters
Number of Circuits 8
Max Supply Voltage 5.25V
Min Supply Voltage 4.75V
Load Capacitance 45pF
Number of Ports 2
Nominal Supply Current 40mA
Current - Output 24mA
Number of Bits 8
Propagation Delay 36 ns
Turn On Delay Time 12 ns
Family LS
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
Max I(ol) 0.024 A
High Level Output Current -2.6mA
Low Level Output Current 24mA
Independent Circuits 1
Height 2.35mm
Length 12.8mm
Width 7.52mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free
Mount Surface Mount
Package / Case SOIC
Number of Pins 20
Weight 500.709277mg
Packaging Tape and Reel
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Subcategory FF/Latches
Technology TTL
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Pin Count 20
Operating Supply Voltage 5V
Polarity Non-Inverting
Power Supplies 5V
Temperature Grade COMMERCIAL

SN74LS373DWRG4 Overview


In the SOIC package, it is embedded. As a result, it has a packaging of Tape and Reel. The design of this electronic part is based on 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The device works with a voltage of 5V for its supply voltage. There are 20 pins on it. It is a member of the LS family of electronic devices. 20 pins are used in its design. It is mounted according to the Surface Mount method. This device has 2 ports that can be connected to it. In the subcategory FF/Latches, this part belongs. A total of 5V power supplies are required for it to operate. Optimal efficiency requires 5V as the supply voltage. The circuit's superior flexibility is achieved through the use of 8 circuits. There is 24mA low level output current set. -2.6mA is set as the high level output current. A temperature below 70°C should be used for operation. The operating temperature should be higher than 0°C. The maximum supply voltage is 5.25V. With a voltage of 4.75V, it operates at its minimum capacity. As far as the logic IC is concerned, it uses BUS DRIVER. Due to its 24mA output current, it offers maximum design flexibility.

SN74LS373DWRG4 Features


SOIC package
8 Bits
20 pin count
20 pins
5V power supplies

SN74LS373DWRG4 Applications


There are a lot of Texas Instruments SN74LS373DWRG4 Latches applications.

  • Communication systems
  • Four-bit storage with output enable
  • Serial Input
  • A/D converters
  • Frequency
  • Multi-line decoders
  • OC-48 communication systems
  • Instrumentation
  • Automotive Body Electronics
  • Pattern generators

Write a review

Note: HTML is not translated!
    Bad           Good