SN74LS373NSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74LS373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 45pF |
| Number of Ports | 2 |
| Nominal Supply Current | 40mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 36 ns |
| Turn On Delay Time | 12 ns |
| Family | LS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Prop. Delay@Nom-Sup | 30 ns |
| Trigger Type | POSITIVE EDGE |
| Control Type | ENABLE LOW |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2mm |
| Length | 12.6mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS373NSR Overview
A package called 20-SOIC (0.209, 5.30mm Width) contains it. It is packaged in the way of Tape & Reel (TR). It uses Tri-State as the output. D-Type Transparent Latch is the logic type of this electrical device. This electronic part is mounted in the way of Surface Mount. In order for it to operate, it needs a supply voltage of 4.75V~5.25V. It is 0°C~70°C at the operating temperature. The 74LS series of FPGAs is the one this FPGA belongs to. The design of this electronic part is based on 8 bits. A device with this design has 20 terminations. The family it belongs to is 74LS373. In order to operate it, the supply voltage must be 5V. 20 pins are provided. There is a device in this electronic family called LS. It is designed with 20 pins. Mounting this electronic component follows the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part belongs to the FF/Latches subcategory. There are 5V power supplies required for this machine to operate. In the circuit, there are 8 input lines that are constituted by an electronic circuit. The device's reliable performance makes it a good choice for TR. It features maximum flexibility in design due to 24mA output current. For maximum efficiency, the supply voltage should be set to 5V.
SN74LS373NSR Features
20-SOIC (0.209, 5.30mm Width) package
74LS series
8 Bits
74LS373 family
20 pin count
20 pins
5V power supplies
SN74LS373NSR Applications
There are a lot of Texas Instruments SN74LS373NSR Latches applications.
- Multistage ripple counting
- Counting
- General-Purpose Register
- Up/down difference counting
- Sample and hold register
- Double bus register system
- Bus system register with enable parallel lines at bus side
- Relay replacement
- Watches
- Hammer
