SN74LS374N
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Number of Ports | 2 |
| Clock Frequency | 50MHz |
| Family | LS |
| Current - Quiescent (Iq) | 40mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 28ns @ 5V, 45pF |
| Trigger Type | Positive Edge |
| Height Seated (Max) | 4.57mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74LS |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | TIN LEAD |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
SN74LS374N Overview
It is embeded in 20-DIP (0.300, 7.62mm) case. The Tubepackage contains it. This output is configured with Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. Through Holemounts this electrical part. With a supply voltage of 4.75V~5.25V volts, it operates. The operating temperature is 0°C~70°C TA. It is an electronic flip flop with the type D-Type. It belongs to the 74LSseries of FPGAs. It should not exceed 50MHzin terms of its output frequency. In total, it contains 1 elements. There is 40mA quiescent consumption. Currently, there are 20 terminations. Power is supplied from a voltage of 5V volts. In terms of electronic devices, this device belongs to the LSfamily of devices. As soon as 5.25Vis reached, Vsup reaches its maximum value. Keeping the supply voltage (Vsup) above 4.75V is necessary for normal operation. The D flip flop has no ports embedded.
SN74LS374N Features
Tube package
74LS series
SN74LS374N Applications
There are a lot of Rochester Electronics, LLC SN74LS374N Flip Flops applications.
- Parallel data storage
- Control circuits
- Latch
- CMOS Process
- Storage registers
- Cold spare funcion
- 2 – Bit synchronous counter
- Count Modes
- Divide a clock signal by 2 or 4
- Buffered Clock
