SN74LS375DR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LS |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | DUMMY VAL |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LS375 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Circuit | 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 15pF |
| Nominal Supply Current | 12mA |
| Output Current | 8mA |
| Number of Bits | 2 |
| Propagation Delay | 27 ns |
| Turn On Delay Time | 12 ns |
| Family | LS |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 400μA 8mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.008 A |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 4 |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS375DR Overview
In the 16-SOIC (0.154, 3.90mm Width) package, it is embedded. A Tape & Reel (TR) package is used to package it. There is a Differential output configured. This electrical device has a logic type of D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. A 4.75V~5.25V supply voltage is required to operate it. There is a temperature of 0°C~70°C at which the system operates. The 74LS series contains FPGAs of this type. There are 2 bits in this electronic part. In this device, there are 16 terminations that have been designed. The family in which it belongs to is 74LS375. The device is operated when the supply voltage is set to 5V. It is equipped with 16 pin count. In terms of electronic devices, this one is in the LS family. With the design of the board, there are only 16 pins. Surface Mount is used to mount this electronic part. There is a subcategory of FF/Latches for this part. There is 5V power supply for it. Based on its reliable performance, this device is appropriate for TAPE AND REEL. The output current of 8mA makes it feature maximum design flexibility. A high level of efficiency is achieved by maintaining the supply voltage at 5V. There are 4 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. Its superior flexibility is achieved by using 2 circuits. There are also other characteristics of it, such as DUMMY VAL.
SN74LS375DR Features
16-SOIC (0.154, 3.90mm Width) package
74LS series
2 Bits
74LS375 family
16 pin count
16 pins
5V power supplies
SN74LS375DR Applications
There are a lot of Texas Instruments SN74LS375DR Latches applications.
- Up/down difference counting
- Shift right register
- Counter timers
- Flip-flops
- Buffer register
- Counting
- Pseudo-random code generators
- Parallel Input
- Automotive HEV/EV Powertrain
- Multi-line decoders
