Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Number of Pins |
16 |
Weight |
951.693491mg |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Series |
74LS |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
DUMMY VAL |
Subcategory |
FF/Latches |
Technology |
TTL |
Voltage - Supply |
4.75V~5.25V |
Terminal Position |
DUAL |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
74LS375 |
Pin Count |
16 |
Output Type |
Differential |
Operating Supply Voltage |
5V |
Circuit |
1:1 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Number of Circuits |
2 |
Load Capacitance |
15pF |
Nominal Supply Current |
12mA |
Output Current |
8mA |
Number of Bits |
2 |
Propagation Delay |
30 ns |
Turn On Delay Time |
12 ns |
Family |
LS |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
400μA 8mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.008 A |
Trigger Type |
POSITIVE EDGE |
Schmitt Trigger |
No |
Number of Output Lines |
4 |
Height |
5.08mm |
Length |
19.3mm |
Width |
6.35mm |
Thickness |
3.9mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74LS375N Overview
In the package 16-DIP (0.300, 7.62mm), it can be found. The package is in the form of Tube. It uses Differential as its output configuration. In this electrical device, the logic type is D-Type Transparent Latch. Mounting this electronic component follows the Through Hole method. A 4.75V~5.25V supply voltage is required to operate it. A temperature of 0°C~70°C is set as the operating temperature. There are a number of FPGAs in this series, including this one. Electronic parts with 2 bits are designed for this application. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The family in which it belongs to is 74LS375. In order to function, the supply voltage should be set to 5V. It is equipped with 16 pin count. It is a member of the LS family of electronic devices. In addition, it is designed with a pin number of 16. This electronic part is mounted in the way of Through Hole. The part belongs to the FF/Latches subcategory. The system is powered by 5V sources. Its output current of 8mA ensures maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. Input lines are generated as binary equivalents by 4 output lines. The superior flexibility of the system is achieved through its use of 2 circuits. It also has characteristics of DUMMY VAL.
SN74LS375N Features
16-DIP (0.300, 7.62mm) package
74LS series
2 Bits
74LS375 family
16 pin count
16 pins
5V power supplies
SN74LS375N Applications
There are a lot of Texas Instruments SN74LS375N Latches applications.
- Stacked or Push-Down Registers
- Parallel Input
- OC-48 communication systems
- Decade counting
- Counter control
- Address register
- Pseudo-random code generators
- Storage
- Automotive Body Electronics
- Watches