SN74LS378NSRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LS |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LS378 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Number of Circuits | 7 |
| Output Current | 8mA |
| Clock Frequency | 40MHz |
| Propagation Delay | 27 ns |
| Turn On Delay Time | 17 ns |
| Family | LS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 22mA |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 27ns @ 5V, 15pF |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 22mA |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2mm |
| RoHS Status | ROHS3 Compliant |
SN74LS378NSRE4 Overview
In the form of 16-SOIC (0.209, 5.30mm Width), it has been packaged. You can find it in the Tape & Reel (TR)package. T flip flop uses Non-Invertedas its output configuration. This trigger is configured to use Positive Edge. Surface Mountis occupied by this electronic component. A 4.75V~5.25Vsupply voltage is required for it to operate. It is operating at a temperature of 0°C~70°C TA. This D latch has the type D-Type. In terms of FPGAs, it belongs to the 74LS series. You should not exceed 40MHzin the output frequency of the device. D latch consists of 1 elements. This process consumes 22mA quiescents. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. If you search by 74LS378, you will find similar parts. A voltage of 5V provides power to the D latch. An electronic device belonging to the family LScan be found here. Surface Mount mounts this electronic component. With its 16pins, it is designed to work with most electronic flip flops. There is a clock edge trigger type of Positive Edgeon this device. The part is included in FF/Latches. It reaches 5.25Vwhen the supply voltage is maximal (Vsup). Due to its superior flexibility, it uses 7 circuits. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. The power supply is 5V. The output current of 8mA makes it feature maximum design flexibility. This input has 3lines in it.
SN74LS378NSRE4 Features
Tape & Reel (TR) package
74LS series
16 pins
5V power supplies
SN74LS378NSRE4 Applications
There are a lot of Texas Instruments SN74LS378NSRE4 Flip Flops applications.
- Balanced 24 mA output drivers
- Test & Measurement
- Patented noise
- Matched Rise and Fall
- Functionally equivalent to the MC10/100EL29
- Parallel data storage
- Asynchronous counter
- ESD performance
- Frequency Dividers
- Registers
