SN74LS393N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74LS |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 35MHz |
| Base Part Number | 74LS393 |
| Pin Count | 14 |
| Max Output Current | 8mA |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 15pF |
| Nominal Supply Current | 38mA |
| Output Current | 16mA |
| Propagation Delay | 60 ns |
| Turn On Delay Time | 60 ns |
| Reset | Asynchronous |
| Family | LS |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 4 |
| Trigger Type | Negative Edge |
| Input Current | 100μA |
| Clock Edge Trigger Type | Negative Edge |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS393N Overview
14-DIP (0.300, 7.62mm)is a package in which this device is packaged. It is configured using 14terminations. This device is fully flexible due to the supply voltage of [0]. There are a total of 14 pins in all components. Tubeis used to package it. In the circuit, 14pins are used to connect other components. The device is mounted in the direction of [0]. In this case, it appears as a member of the family [0]. With its 74LSseries designation, it can be used for a range of applications. Binary Counteris used as the logic type. The operating temperature should be set at 0°C~70°C. This device is mounted in a Through Holemanner. In the presence of the supply voltage of [0], it can operate more reliably. An array consists of 4bits for each element. It should be noted that there are more related parts under the 74LS393base part number. The voltage source produces a voltage of 5V volts. It takes supply voltage of 5V to operate. It operates with the frequency of 35MHz. As part of its normal operation, it has been designed with 2circuits.
SN74LS393N Features
Embedded in the 14-DIP (0.300, 7.62mm) package
4 bits per element
Operating supply voltage of 5V
Frequency of 35MHz
SN74LS393N Applications
There are a lot of Texas Instruments SN74LS393N Counters & Dividers applications.
- Decade counter/decimal decode display (CD4017B）
- VHF, UHF, FM, AM, etc.
- Clocks
- Time Out Timer for Consumer-Application Industrial Controls
- TRUE RMS-TO-DC CONVERSION
- Divide-by"N" counters/frequency synthesizers
- Time-delay circuits
- Signal gating
- Digital multiplexing and demultiplexing
- MULTIPLICATION
