SN74LS393NSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Weight | 208.312296mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 35MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LS393 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Load Capacitance | 15pF |
| Propagation Delay | 60 ns |
| Reset | Asynchronous |
| Family | LS |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 4 |
| Trigger Type | Negative Edge |
| Clock Edge Trigger Type | Negative Edge |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS393NSR Overview
This is a device supplied in the 14-SOIC (0.209, 5.30mm Width) package. There are 14terminations used for configuring it. The supply voltage of 5V enables it operate in a fully flexible way. The 2elements are connected by wires. There are 14pins on all components. There is a package in the form of Tape & Reel (TR). There are 14 pins going on to connect other parts in the circuit. It is mounted in the way of [0]. It emerges as a member of LS family. The 74LSseries is well suited to a number of uses. In this case, the logic type is set to [0]. Setting the operating temperature to 0°C~70°C is recommended. There is a mounting type of Surface Mounton this device. In the case of a supply voltage of [0], it operates more reliably. Each element in the array stores 4 bits. As far as Pbfree code is concerned, the result may be yes. Among its base part number [0], you will find additional parts that are related. In order to pack the product, TRis employed. There is 5V voltage comes from the voltage source. The device requires a supply voltage of [0]. The frequency of the device is 35MHz.
SN74LS393NSR Features
Embedded in the 14-SOIC (0.209, 5.30mm Width) package
4 bits per element
Operating supply voltage of 5V
Frequency of 35MHz
SN74LS393NSR Applications
There are a lot of Texas Instruments SN74LS393NSR Counters & Dividers applications.
- Programmable decade counters
- Frequency division
- SQUARE ROOT
- Divide-by"N" counters/frequency synthesizers
- counting/frequency sy nthesizers-BCD output
- Time Out Timer for Consumer-Application Industrial Controls
- Communications Digital Frequency Synthesizers;
- POWER COMPUTATION
- Time-delay circuits
- Frequency dividers
