banner_page

SN74LS399N

16 Terminations4.75V~5.25V 16 Pin 74LS399 Signal switch74LS Series 1 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LS399N
  • Package: 16-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 869
  • Description: 16 Terminations4.75V~5.25V 16 Pin 74LS399 Signal switch74LS Series 1 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case 16-DIP (0.300, 7.62mm)
Number of Pins 16
Weight 951.693491mg
Operating Temperature 0°C~70°C
Packaging Tube
Series 74LS
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Multiplexer
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Power Dissipation 37mW
Technology TTL
Voltage - Supply 4.75V~5.25V
Terminal Position DUAL
Number of Functions 1
Supply Voltage 5V
Base Part Number 74LS399
Pin Count 16
Operating Supply Voltage 5V
Circuit 4 x 2:1
Polarity Non-Inverting
Power Supplies 5V
Number of Channels 4
Number of Bits 2
Throw Configuration DPST
Propagation Delay 32 ns
Quiescent Current 7.3mA
Family LS
Logic Function Decoder, Demultiplexer
Number of Inputs 8
Current - Output High, Low 400μA 8mA
Supply Type Single
Bandwidth 35MHz
Voltage Supply Source Single Supply
Independent Circuits 1
Height 5.08mm
Length 19.3mm
Width 6.35mm
Thickness 3.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74LS399N Overview


It is included in the 16-DIP (0.300, 7.62mm) in order to save board space.Tube is the method used for packaging.As far as mounting is concerned, digital switch ic uses Through Hole.In the multiplexers, the analog IC Multiplexer is used.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at 0°C~70°C.Designers have greater flexibility using digital controlled switch when it works with 4.75V~5.25V voltage.Multiplexers in the 74LS series are suitable for a wide range of applications.The basic configuration includes 16 terminations.There is a base part number of 74LS399 which can also be used in order to locate the logic switch that are related to this item.In this case, 5V is the voltage supplied to the multiplexer's system.This turn signal switch has 16 component pins.There is a type of supply of Single.It is configured with 16 pins.The mounting point is Through Hole.I would like to refer to the logic switch as a member of the LS family.Signal multiplexer provides 2 bits.In order for 5V to operate normally, a power supply is provided.Without any external influences, it consumes 7.3mA current of multiplexer ic at all times.Using a supply voltage of 5V can result in reliable performance of the multiplexers.In this multiplexer, there is a total of 8 inputs.A total of 4 transmission channels are available in the turn signal switch's circuit.

SN74LS399N Features


Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74LS399N Applications


There are a lot of Texas Instruments SN74LS399N Signal Switches / Multiplexers / Decoders applications.

  • Medical industry
  • Computer memory
  • Idle motor
  • PCIe
  • Enabling block of memory depending on address in memory chips
  • Make full adder
  • Electronic circuits
  • Automatic Monitoring systems
  • Microprocessor instruction decoding
  • Data collection system

Write a review

Note: HTML is not translated!
    Bad           Good