SN74LS42DG4
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Decoder/Drivers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 30 ns |
| Family | LS |
| Logic Function | Decoder, Demultiplexer |
| Supply Type | Single |
| Bandwidth | 35MHz |
| Logic IC Type | DECIMAL DECODER/DRIVER |
| Max I(ol) | 0.008 A |
| High Level Output Current | -400μA |
| Low Level Output Current | 8mA |
| Number of Input Lines | 4 |
| Number of Output Lines | 10 |
| Input Conditioning | STANDARD |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
SN74LS42DG4 Overview
Digital switch is provided in the SOIC for the purpose of saving board space.The package is packaged in accordance with Rail/Tube.Among its basic features are 16 terminations.For multiplexer's system, a voltage of 5V is supplied.A component pin count of 16 can be found on this turn signal switch.It employs GULL WING as the point at which conductors come to an end.Its supply type is Single, which is used as the source of power.The board has 16 pins configured.This unit is mounted in the way of Surface Mount.The logic switch is a member of the LS family.It is provided that 5V has a power supply in order to function normally.The part belongs to the Decoder/Drivers category of signal switches.The performance of the multiplexers can be reliably maintained at a voltage of 5V.To accept voltage levels, the multiplexers have4 input lines.A signal source is provided by 10 output lines.The signal switch can operate at a maximum temperature of 70°C.It is recommended that a minimum operating temperature of the multiplexer of 0°C be maintained.The device is specified to operate at a maximum supply voltage of 5.25V in accordance with the applicable device specification.The digital swith is specified to operate at the minimum supply voltage of 4.75V in compliance with the applicable device specification.In the mux switch configuration, there are 1 elements.The logic IC of the digitalswitch is DECIMAL DECODER/DRIVER.
SN74LS42DG4 Features
Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
4 input lines
10 output lines
DECIMAL DECODER/DRIVER as the logic IC
SN74LS42DG4 Applications
There are a lot of Texas Instruments SN74LS42DG4 Signal Switches / Multiplexers / Decoders applications.
- Code conversion
- War field flying robot with a night vision flying camera
- Microprocessor input/output systems
- Logic circuits
- RF-based home automation system
- Transmission from the computer system of a satellite
- Robotic vehicles
- Data distribution
- Frequency multiplexing system
- Small scale TV wall
