SN74LS590D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | TCO OUTPUT; REGISTERED OUTPUTS |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 35MHz |
| Base Part Number | 74LS590 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Load Capacitance | 45pF |
| Propagation Delay | 45 ns |
| Turn On Delay Time | 45 ns |
| Reset | Asynchronous |
| Family | LS |
| Logic Function | Counter |
| Direction | Up |
| Output Characteristics | 3-STATE |
| Logic Type | Binary Counter |
| Max I(ol) | 0.024 A |
| Number of Bits per Element | 8 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 65mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS590D Overview
The device is packaged in the 16-SOIC (0.154, 3.90mm Width)type. This configuration uses 16terminations. The supply voltage of 5V permits it to operate with full flexibility. An interconnection of 1elements is provided by wires. The number of all component pins is 16. It is packaged in a manner consistent with Tube. In the circuit, there are 16pins that connect other components. Surface Mountis the way in which it is mounted. Initially, it appears to belong to the LS family. This device is a member of the 74LSseries and is well suited for a wide range of applications. Binary Counteris selected as the logic type. 0°C~70°Cshould be set as the operating temperature. Using a Surface Mountmounting type, it is mounted. It is able to operate with higher reliability when the supply voltage of 4.75V~5.25V is provided. The array stores 8bits in each element. Based on the Pbfree code, the result may be yes. Among the features of this electronic device, TCO OUTPUT; REGISTERED OUTPUTSare essential. Under its base part number of [0], you will find additional related parts. The voltage source produces 5Vvoltage. To operate, it requires a supply voltage of 5V volts. Frequency 35MHzdetermines its operation.
SN74LS590D Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
8 bits per element
TCO OUTPUT; REGISTERED OUTPUTS
Operating supply voltage of 5V
Frequency of 35MHz
SN74LS590D Applications
There are a lot of Texas Instruments SN74LS590D Counters & Dividers applications.
- Time-delay circuits
- LINEARIZATION
- Digital multiplexing and demultiplexing
- Time Out Timer for Consumer-Application Industrial Controls
- SQUARE ROOT
- Divide-by"N" counters/frequency synthesizers
- Timers
- Fixed and programmable counters greater than 10
- Fixed or Programmable Frequency Division
- SQUARING
