SN74LS590DRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LS |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | TCO OUTPUT; REGISTERED OUTPUTS |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 35MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LS590 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 45pF |
| Propagation Delay | 45 ns |
| Turn On Delay Time | 45 ns |
| Reset | Asynchronous |
| Family | LS |
| Logic Function | Counter |
| Direction | Up |
| Output Characteristics | 3-STATE |
| Logic Type | Binary Counter |
| Max I(ol) | 0.024 A |
| Number of Bits per Element | 8 |
| Prop. Delay@Nom-Sup | 33 ns |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 65mA |
| Clock Edge Trigger Type | Positive Edge |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LS590DRE4 Overview
A 16-SOIC (0.154, 3.90mm Width)package is used for this device. For its configuration, 16terminations are used. As a result of the supply voltage of 0, 5Vcan operate in a fully flexible manner. The 1elements are connected by wires. All component pins are equal to 16. In this case, it is packaged as Tape & Reel (TR). In the circuit, there are 16pins that connect other parts. Using [0], it can be mounted. In this case, it belongs to the family of [0]. Due to the fact that it is a member of the 74LSseries, it has a wide range of applications. It is assumed that the logic type is [0]. 0°C~70°Cshould be the operating temperature. Using a Surface Mountmounting type, it is mounted. Providing a voltage of 4.75V~5.25Vensures higher reliability of operation. There are 8 bits stored in each element of the array. The result may be nowhen expressing the result in Pbfree code. When it comes to this electronic device, TCO OUTPUT; REGISTERED OUTPUTS are much important features. There are more related parts under the 74LS590base part number. TAPE AND REEL is employed for its packing. As a result of the voltage source, there is 5V voltage. In the case of the supply voltage (Vsup), it can be as low as 4.75V. It operates with the frequency of 35MHz. It is possible to supply voltages up to 5.25V volts (Vsup).
SN74LS590DRE4 Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
8 bits per element
TCO OUTPUT; REGISTERED OUTPUTS
Frequency of 35MHz
SN74LS590DRE4 Applications
There are a lot of Texas Instruments SN74LS590DRE4 Counters & Dividers applications.
- Frequency dividing circuits
- SQUARE ROOT
- Fixed and programmable counters greater than 10
- TRUE RMS-TO-DC CONVERSION
- Digital multiplexing and demultiplexing
- Time-delay circuits
- Dual Up Counters
- Clocks
- Decade counter/decimal decode display (CD4017B）
- Fixed or Programmable Frequency Division
