SN74LS697N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Base Part Number | 74LS697 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 40 ns |
| Reset | Asynchronous |
| Family | LS |
| Logic Function | Counter |
| Direction | Up |
| Output Characteristics | 3-STATE |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 70mA |
| Clock Edge Trigger Type | Positive Edge |
| Timing | Synchronous |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LS697N Overview
In the 20-DIP (0.300, 7.62mm)package, it is supplied. This configuration uses 20terminations. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. The 1elements are connected by wires. 20is the number of pins on all components. There is a package in the form of Tube. Circuit components are connected by 20pins. It is mounted in the manner of [0]. In this case, it belongs to the family of [0]. The 74LSseries offers a wide range of applications due to its versatility. The logic type of Binary Counter is adopted. Ideally, the operating temperature should be set to 0°C~70°C. Using a Through Holemounting type, it is mounted. When the supply voltage is set to [0], it is able to operate with greater reliability. An array consists of 4bits for each element. In terms of Pbfree code, the result may be yes. Further related parts may be found under the base part number 74LS697. In order for it to operate, it requires a supply voltage of 5V . With a frequency of [0], it operates.
SN74LS697N Features
Embedded in the 20-DIP (0.300, 7.62mm) package
4 bits per element
Operating supply voltage of 5V
Frequency of 20MHz
SN74LS697N Applications
There are a lot of Texas Instruments SN74LS697N Counters & Dividers applications.
- Digital multiplexing and demultiplexing
- Binary counter/decoder
- Dual Up Counters
- Programmable binary and decade
- MULTIPLICATION
- Timing applications
- Fixed or Programmable Frequency Division
- Timers
- Signal gating
- POWER COMPUTATION
