SN74LS73AN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74LS |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | 74LS73 |
| Function | Master Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Output Current | 8mA |
| Clock Frequency | 45MHz |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 15 ns |
| Family | LS |
| Logic Function | Flip-Flop |
| Current - Quiescent (Iq) | 6mA |
| Output Characteristics | TOTEM POLE |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 20ns @ 5V, 45pF |
| Trigger Type | Negative Edge |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 6mA |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Negative Edge |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS73AN Overview
The flip flop is packaged in 14-DIP (0.300, 7.62mm). As part of the package Tube, it is embedded. The output it is configured with uses Differential. The trigger it is configured with uses Negative Edge. Through Holeis in the way of this electric part. A voltage of 4.75V~5.25Vis required for its operation. 0°C~70°C TAis the operating temperature. There is JK Type type of electronic flip flop associated with this device. In terms of FPGAs, it belongs to the 74LS series. It should not exceed 45MHzin its output frequency. It consumes 6mA of quiescent current without being affected by external factors. There have been 14 terminations. If you search by 74LS73, you will find similar parts. An input voltage of 5Vpowers the D latch. The electronic device belongs to the LSfamily. The electronic part is mounted in the way of Through Hole. This board is designed with 14pins on it. This device has the clock edge trigger type of Negative Edge. The part is included in FF/Latches. In order for the device to operate, it requires 5V power supplies. The supply voltage should be maintained at 5V for high efficiency. With an output current of 8mA, this device offers maximum design flexibility. A total of 3input lines have been provided. It is reported that there are 2 channels.
SN74LS73AN Features
Tube package
74LS series
14 pins
5V power supplies
SN74LS73AN Applications
There are a lot of Texas Instruments SN74LS73AN Flip Flops applications.
- Safety Clamp
- Matched Rise and Fall
- CMOS Process
- Individual Asynchronous Resets
- Load Control
- Storage registers
- ESD protection
- Instrumentation
- Latch
- Balanced Propagation Delays
