SN74LS74ADR
| Parameters | |
|---|---|
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latch |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74LS74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Output Current | 8mA |
| Clock Frequency | 33MHz |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 13 ns |
| Family | LS |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 40ns @ 5V, 15pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
SN74LS74ADR Overview
The flip flop is packaged in a case of 14-SOIC (0.154, 3.90mm Width). Package Cut Tape (CT)embeds it. T flip flop is configured with an output of Differential. It is configured with a trigger that uses Positive Edge. Surface Mountis positioned in the way of this electronic part. A voltage of 4.75V~5.25Vis required for its operation. It is at 0°C~70°C TAdegrees Celsius that the system is operating. This logic flip flop is classified as type D-Type. This type of FPGA is a part of the 74LS series. Its output frequency should not exceed 33MHz Hz. A total of 14terminations have been recorded. You can search similar parts based on 74LS74. The D flip flop is powered by a voltage of 5V . A device of this type belongs to the family of LS. There is an electronic part that is mounted in the way of Surface Mount. With its 14pins, it is designed to work with most electronic flip flops. It has a clock edge trigger type of Positive Edge. There is a FF/Latchbase part number assigned to the RS flip flops. 2 circuits are used to achieve its superior flexibility. As a result of its reliability, this D flip flop is ideally suited for TR. The power supply is 5V. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. Featuring the maximum design flexibility, it has an output current of 8mA . The number of input lines is 3.
SN74LS74ADR Features
Cut Tape (CT) package
74LS series
14 pins
5V power supplies
SN74LS74ADR Applications
There are a lot of Texas Instruments SN74LS74ADR Flip Flops applications.
- Parallel data storage
- Clock pulse
- Computers
- QML qualified product
- Buffered Clock
- Differential Individual
- 2 – Bit synchronous counter
- Bounce elimination switch
- Storage Registers
- Asynchronous counter
