SN74LS74ANSR
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latch |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LS74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Output Current | 8mA |
| Clock Frequency | 33MHz |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 13 ns |
| Family | LS |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 40ns @ 5V, 15pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Weight | 208.312296mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
SN74LS74ANSR Overview
In the form of 14-SOIC (0.209, 5.30mm Width), it has been packaged. The package Tape & Reel (TR)contains it. T flip flop uses Differentialas the output. This trigger uses the value Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.75V~5.25V volts. Temperature is set to 0°C~70°C TA. D-Typedescribes this flip flop. This type of FPGA is a part of the 74LS series. A frequency of 33MHzshould not be exceeded by its output. There have been 14 terminations. D latch belongs to the 74LS74 family. It is powered by a voltage of 5V . The electronic device belongs to the LSfamily. There is an electronic part mounted in the way of Surface Mount. It is designed with 14 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is included in FF/Latch. Despite its superior flexibility, it relies on 2 circuits to achieve it. Considering the reliability of this T flip flop, it is well suited for TR. It operates from 5V power supplies. For high efficiency, the supply voltage should be kept at 5V. The 8mA output current allows it to be designed with the greatest amount of flexibility. It has 3lines.
SN74LS74ANSR Features
Tape & Reel (TR) package
74LS series
14 pins
5V power supplies
SN74LS74ANSR Applications
There are a lot of Texas Instruments SN74LS74ANSR Flip Flops applications.
- Event Detectors
- ATE
- Latch
- Storage Registers
- Computing
- Shift Registers
- Digital electronics systems
- CMOS Process
- Convert a momentary switch to a toggle switch
- Automotive
