SN74LS75DG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FF/Latches |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 15pF |
| Nominal Supply Current | 12mA |
| Current - Output | 8mA |
| Number of Bits | 4 |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 9 ns |
| Family | LS |
| Logic Function | D-Type, Latch |
| Logic IC Type | D LATCH |
| Max I(ol) | 0.008 A |
| Trigger Type | HIGH LEVEL |
| High Level Output Current | -400μA |
| Low Level Output Current | 8mA |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LS75DG4 Overview
There is an embedded version of it in package SOIC. As a result, it has a packaging of Rail/Tube. The electronic part in this image has 4 bits. This device has been designed with 16 terminations available. It operates with a supply voltage of 5V. It has 16 pins that makes it easy to use. It is a member of the LS family of electronic devices. With the design of the board, there are only 16 pins. This electronic part is mounted in the way of Surface Mount. FF/Latches is the subcategory of this part. There are 5V power supplies required for this machine to operate. The supply voltage should be maintained at 5V for high efficiency. It consists of 2 elements. The low level output current is set to 8mA. It has been set to -400μA for the high level output current. Operating temperatures should be below 70°C. Temperatures higher than 0°C should be used for operation. 5.25V is the maximum voltage it supports. In order for the machine to operate, the supply voltage must be 4.75V. It uses a logic IC of type D LATCH. Its output current of 8mA ensures maximum design flexibility.
SN74LS75DG4 Features
SOIC package
4 Bits
16 pin count
16 pins
5V power supplies
2 elements
SN74LS75DG4 Applications
There are a lot of Texas Instruments SN74LS75DG4 Latches applications.
- Decade counting 7-segment decimal display
- Parallel Output
- Serial Input
- Buffer register
- Shift right register
- Sample and hold register
- Accumulator Registers
- Storage
- Parallel Input
- Relay
