banner_page

SN74LS75N

D-Type, Latch 4.75V~5.25V 2 Bits Differential Latches 74LS Series 74LS75 16 Pins DUAL TTL 16-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LS75N
  • Package: 16-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 185
  • Description: D-Type, Latch 4.75V~5.25V 2 Bits Differential Latches 74LS Series 74LS75 16 Pins DUAL TTL 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Output Type Differential
Operating Supply Voltage 5V
Circuit 1:1
Polarity Non-Inverting
Power Supplies 5V
Number of Circuits 2
Load Capacitance 15pF
Nominal Supply Current 12mA
Output Current 8mA
Number of Bits 2
Propagation Delay 27 ns
Quiescent Current 6.3mA
Turn On Delay Time 9 ns
Family LS
Logic Function D-Type, Latch
Current - Output High, Low 400μA 8mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.008 A
Trigger Type HIGH LEVEL
Schmitt Trigger No
Input Current 100μA
Number of Output Lines 4
Height 5.08mm
Length 19.3mm
Width 6.35mm
Thickness 3.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Contact Plating Gold
Mount Through Hole
Mounting Type Through Hole
Package / Case 16-DIP (0.300, 7.62mm)
Number of Pins 16
Weight 951.693491mg
Operating Temperature 0°C~70°C
Packaging Tube
Series 74LS
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Subcategory FF/Latches
Technology TTL
Voltage - Supply 4.75V~5.25V
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Base Part Number 74LS75
Pin Count 16

SN74LS75N Overview


In the package 16-DIP (0.300, 7.62mm), it can be found. Tube is the way it is packaged. It uses Differential as the output. There is a logic type of D-Type Transparent Latch associated with this electrical device. According to Through Hole, this electronic part is mounted. It operates with a supply voltage of 4.75V~5.25V. A temperature of 0°C~70°C is set as the operating temperature. The 74LS series of FPGAs is the one this FPGA belongs to. It is designed with 2 bits. A device with this design has 16 terminations. As a member of the 74LS75 family, it falls under that category. In order to operate it, the supply voltage must be 5V. With 16 pins, it is equipped. In terms of electronic devices, this one is in the LS family. The 16 pins are designed into it. Mounting this electronic component follows the Through Hole method. Subcategory FF/Latches includes this part. The system is powered by 5V sources. With 8mA, maximum design flexibility is ensured. In order to achieve high efficiency, the supply voltage should be kept at 5V. Input lines are generated as binary equivalents by 4 output lines. As far as external factors are concerned, it consumes 6.3mA of quiescent current without getting affected by them. In order to achieve its superior flexibility, 2 circuits are used.

SN74LS75N Features


16-DIP (0.300, 7.62mm) package
74LS series
2 Bits
74LS75 family
16 pin count
16 pins
5V power supplies

SN74LS75N Applications


There are a lot of Texas Instruments SN74LS75N Latches applications.

  • Automotive Cluster
  • Parallel Input
  • Decade counting 7-segment decimal display
  • Hammer Device Information
  • Parallel data storage
  • Automatic test equipment
  • Shift right register
  • Relay
  • Counter
  • Counting

Write a review

Note: HTML is not translated!
    Bad           Good