SN74LS92D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 42MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LS92 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Propagation Delay | 50 ns |
| Turn On Delay Time | 50 ns |
| Reset | Synchronous |
| Family | LS |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Divide-by-12 |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| fmax-Min | 32 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS92D Overview
This device is supplied in the 14-SOIC (0.154, 3.90mm Width) package. It is configured using 14terminations. The supply voltage of 5V enables it operate in a fully flexible way. In wires, 1elements are connected. The total number of component pins is 14. In this case, it is packaged as Tube. There are 14 pins going on to connect other parts in the circuit. To mount it, use the method of [0]. In this case, it appears as a member of the family [0]. With its 74LSseries designation, it can be used for a range of applications. It is adopted that the logic type is [0]. Ideally, the operating temperature should be set to 0°C~70°C. There is a mounting type of Surface Mounton this device. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. It contains 4elements. The result may be yesin terms of Pbfree code. Under its base part number of [0], you will find additional related parts. In this case, there is 5V voltage coming from the voltage source. In order to operate, it requires a voltage of [0]. It operates at a frequency of 42MHz Hz.
SN74LS92D Features
Embedded in the 14-SOIC (0.154, 3.90mm Width) package
4 bits per element
Operating supply voltage of 5V
Frequency of 42MHz
SN74LS92D Applications
There are a lot of Texas Instruments SN74LS92D Counters & Dividers applications.
- LINEARIZATION
- Up Counters
- Dual Up Counters
- ALGEBRAIC COMPUTATION
- ANALOG SIGNAL PROCESSING
- Frequency division
- Timers
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- counting/frequency sy nthesizers-BCD output
- Time Out Timer for Consumer-Application Industrial Controls
