SN74LV06APWT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Feature | Open Drain |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Gates |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 6 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV06 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Max Output Current | 16mA |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Output Current | 16mA |
| Propagation Delay | 7.5 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 7.5 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Buffer, Inverter |
| Current - Output High, Low | - 16mA |
| Logic Type | Inverter |
| Number of Gates | 6 |
| Max Propagation Delay @ V, Max CL | 7.5ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 12 ns |
| Schmitt Trigger | NO |
| Logic Level - Low | 0.5V |
| Logic Level - High | 1.5V |
| Power Supply Current-Max (ICC) | 0.02mA |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV06APWT Overview
The part is convenient to ship overseas because it is packed in a 14-TSSOP (0.173, 4.40mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Inverter logic is the basis of its operation. To ensure the part's full function, a voltage of 2V~5.5V is needed. The operating temperature is extended to around -40°C~85°C. It is mounted in position Surface Mount. In both high and low states, output current is - 16mA. 74LV is the series it belongs to. Total terminations are 14. The part has 6 functions that significantly boost the user experience. The chip is a part of LV/LV-A/LVX/H. Trying searching with 74LV06 will yield device variants. Part bodies are injected with 14 pins. Surface Mount mounted, this logic device is widely used in many applications. The functions of 14 pins can be found in the datasheets. The part has 20μA current flowing through it in the quiescent state. This logic device is a typical Gates. It has a load capacitance of 50pF. To supply the device, a voltage of 2V must be applied. The supply voltage should not exceed 5.5V. There is a method TR in it that is designed for the industry. The datasheet specifies that the part requires 3.3V volts of power. Device output current is 16mA. The logic of 6 gates. Open Drain is featured in it.
SN74LV06APWT Features
Inverter Logic Type
Operating Temperature: -40°C~85°C
LV/LV-A/LVX/H Family
Quiescent Current: 20μA
Output Current: 16mA
6 Gates
SN74LV06APWT Applications
There are a lot of Texas Instruments SN74LV06APWT Gates and Inverters applications.
- Reactive power compensation function
- Pocket PC
- Photovoltaic system
- Roof distributed power station
- Audio
- Island protection
- Electric car
- Laptop
- Small and medium distributed photovoltaic power generation system
- Ship
