SN74LV123ARGYRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Weight | 37.194574mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LV123 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Output Current | 12mA |
| Number of Bits | 2 |
| Propagation Delay | 13ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 44 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Multivibrator |
| Current - Output High, Low | 12mA 12mA |
| Logic Type | Monostable |
| Output Polarity | COMPLEMENTARY |
| Schmitt Trigger Input | Yes |
| Number of Data/Clock Inputs | 2 |
| Height | 1mm |
| Length | 4mm |
| Width | 3.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV123ARGYRG4 Overview
The product is packaged in a 16-VFQFN Exposed Pad case.In case of Tape & Reel (TR), you should pack the equipment.Surface Mount is recommended for mounting.There is a Monostable included in the logic type of the part.We supply it within 2V~5.5V.These electrical components can be found in the 74LV series.Multivibrator is crMultivibratorical that this part's minimum operating temperature does not reach -40°C~125°C.There is a small current output of 12mA 12mA while there is a large voltage output from 12mA 12mA.Multivibrator is designed on the basis of the 74LV123 family of components.The total number of terminations of this device is 16.Multivibrator is possible for the device to handle the 2.5V voltage.It has 2 inputs for data or clock.16 pins are present on the part in total.The LV/LV-A/LVX/H family is what it belongs to.Multivibrator is possible to mount 16 pins on this part if you wish.Surface Mount mounts the device on the wall.Multivibrator is necessary to have a higher minimum supply voltage than 2V.During quiescent time, it consumes current at 20μA.5V volts of voltage is required to run this chip.The output current that can be supplied to the device is 12mA.There is a possibility of giving voltage at 3.3V volts using this device.IC chips have 2 bits total.2 elements are included in it.The part is packaged by TR.
SN74LV123ARGYRG4 Features
in 16-VFQFN Exposed Pad package
Mounting Type: Surface Mount
Logic Type: Monostable
Operating Temperature: 74LV
based on 74LV123
Supply Voltage: 2.5V
Quiescent Current at 20μA
output current at 12mA
2 bits
SN74LV123ARGYRG4 Applications
There are a lot of Texas Instruments SN74LV123ARGYRG4 applications of multivibrators.
- GPS: Personal Navigation Devices
- Puls delay and timing
- AV Receivers
- Astable multivibrator
- Frequency division
- Digital Radio and Internet Radio Players
- DVD Recorders and Players
- Embedded PCs
- Frequency multiplication
- Timing clrcults
