SN74LV126ADR
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV126 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | 3-State |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 7.5 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 20.5 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | Buffer, Non-Inverting |
| Number of Bits per Element | 1 |
| Control Type | ENABLE HIGH |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
SN74LV126ADR Overview
Logical driver uses a neat 14-SOIC (0.154, 3.90mm Width) package. Cut Tape (CT) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 2V~5.5V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is 16mA 16mA. Logical driver can deal with 3-State output (s). Digital buffer is one of the 74LV series devices. 14 terminations with different functions. Buffer IC reuqires a supply voltage of 2.5V. This logical driver is a member of the LV/LV-A/LVX/H family. 14 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 14 pins. Enhanced with 2 ports. The bus transceiver employs 1 bits for each element. You can search "74LV126" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE HIGH control technology. In quiescent state, the electronic part uses 20μA. It is recommended to use a 3.3V power supply. It is generally sold in TR package. To supply the device, a minimum voltage of 2V is a must. 4 channels for high quality communication. Wireless transceiver is able to output 8 lines.
SN74LV126ADR Features
Bus Driver/Transceivers
SN74LV126ADR Applications
There are a lot of Texas Instruments SN74LV126ADR Buffers & Transceivers applications.
- Fiber distributed data interface (FDDI)
- 1x/2x Fiber Channel
- Data center
- Wireless interactive experience
- Broadcast application
- Cable network front end
- Lamps
- Military satellite communications
- Home theater wiring-free
- AV receiver
